Angled shot of a Adafruit Feather M4 Express.
It's what you've been waiting for, the Feather M4 Express featuring ATSAMD51. This Feather is fast like a swift, smart like an owl, strong like a ox-bird (it's half ox,...
$22.95
In Stock
Angled shot of a DS3231 Precision RTC FeatherWing - RTC Add-on For Feather Boards.
A Feather board without ambition is a Feather board without FeatherWings! This is the DS3231 Precision RTC FeatherWing: it adds an extremely accurate I2C-integrated...
$13.95
In Stock
Angled shot of a Adafruit FeatherWing OLED - 128x32 OLED Add-on For Feather connected to a white breadboard and a lithium battery.
A Feather board without ambition is a Feather board without FeatherWings! This is the FeatherWing OLED: it adds a 128x32 monochrome OLED plus 3 user buttons to...
$14.95
In Stock
Triple prototyping feather wing PCB with socket headers installed
This is the FeatherWing Tripler - a prototyping add-on and more for all Feather boards. This is similar to our
$8.50
In Stock
Angled shot of CR1220 12mm Diameter - 3V Lithium Coin Cell Battery - CR1220.
These are the highest quality & capacity batteries, the same as shipped with the iCufflinks, iNecklace, Datalogging and GPS Shields, GPS HAT, etc. One battery per order...
$0.95
In Stock
Slim Lithium Ion Polymer Battery 3.7v 400mAh with JST 2-PH connector and short cable
Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This...
Out of Stock
Angled shot of a Header Kit for Feather - 12-pin and 16-pin Female Header Set.
These two Female Headers alone are, well, lonely. But pair them with any of our 
$0.95
In Stock
Angled shot of two stacking headers.
These two Short Female Headers alone are, well, lonely. But pair them with any of our 
$1.50
In Stock
Black Nylon Screw and Stand-off Set with M2.5 Threads, kit box
Totaling 380 pieces, this M2.5 Screw Set is a must-have for your workstation. You'll have enough screws, nuts, and hex standoffs to fuel your maker...
$16.95
In Stock
Smallish table-vise with adjustable jaws and universal joint
The best mini-vise for working on smaller PCBs (2.875" or less in one dimension)! The jaws are strong plastic that wont damage the PCB and doesn't mind if you hit it with the...
$37.50
In Stock
Red and black diagonal flush cutters
These are the best diagonal cutters, large super-comfortable grip to use and have strong nippers for perfect trimming of wires and leads. I've used my pair every day for years.
Out of Stock
Spool of NinjaFlex Filament for 3D Printers - liquid hot lava color with 1.75mm Diameter.
Looking beyond ABS? Tired of PLA? Open a world of possibilities, limited only by your imagination. NinjaFlex, a cutting-edge filament for 3D printers, is a specially formulated...
Discontinued