Take a moment to review the components in the circuit diagram. This illustration is meant for referencing wired connections - The length of wire, position and size of components are not exact. 

The wire must be at least 70mm long in order to reach from the breakout to the USB connector. This will give enough slack to open and close the lid. 

The illustration above depicts the top and bottom sides of one Micro USB connector, do not connect two USB Connectors to the breakout board!

This guide was first published on Dec 06, 2017. It was last updated on Dec 06, 2017.

This page (Circuit Diagram) was last updated on Dec 04, 2017.

Text editor powered by tinymce.