Connect the Servo!

Connect the servo red wire to the Micro:Bit 3V power pin, the servo black wire to Micro:Bit ground pin, and the servo white (or yellow) wire to the Micro:Bit input pin P0.

We like to use these Alligator-to-Breadboard cables but you can also DIY your own with plain alligator clips and some wire

Small Alligator Clip to Male Jumper Wire Bundle - 12 Pieces

PRODUCT ID: 3255
For bread-boarding with unusual non-header-friendly surfaces, these cables will be your best friends! No longer will you have long strands of alligator clips that are grabbing little...
$7.95
IN STOCK
This guide was first published on Sep 01, 2017. It was last updated on Sep 01, 2017.
This page (Connect the Servo!) was last updated on Aug 06, 2020.