CircuitPython is a derivative of MicroPython designed to simplify experimentation and education on low-cost microcontrollers. It makes it easier than ever to get prototyping by requiring no upfront desktop software downloads. Simply copy and edit files on the CIRCUITPY drive to iterate.
CircuitPython Quickstart
Follow this step-by-step to quickly get CircuitPython running on your board.
Make sure you use CircuitPython 9.0.0 final or later. CircuitPython 9.0.0-beta.1 and earlier have a bug that can corrupt the fileystem.
import storage storage.erase_filesystem()
Your board will reboot after running this.
As of CircuitPython 9, you'll need to create a folder called "sd" on your CIRCUITPY drive to mount the microSD card, if it's not already there.
Click the link above to download the latest CircuitPython UF2 file.
Save it wherever is convenient for you.
Plug your board into your computer, using a known-good data-sync cable, directly, or via an adapter if needed.
Double-click the reset button (highlighted in red above), and you will see the RGB status LED(s) turn green (highlighted in green above). If you see red, try another port, or if you're using an adapter or hub, try without the hub, or different adapter or hub.
For this board, tap reset and wait for the LED to turn purple, and as soon as it turns purple, tap reset again. The second tap needs to happen while the LED is still purple.
If you do not see the LED turning purple, you will need to reinstall the UF2 bootloader. See the Factory Reset page in this guide for details.
If double-clicking doesn't work the first time, try again. Sometimes it can take a few tries to get the rhythm right!
A lot of people end up using charge-only USB cables and it is very frustrating! Make sure you have a USB cable you know is good for data sync.
You will see a new disk drive appear called CAMERABOOT. Drag the adafruit-circuitpython-adafruit_esp32s3_camera-etc.uf2 file to CAMERABOOT.
Page last edited July 06, 2024
Text editor powered by tinymce.
