Overhead shot of two square-shaped PCB boards for a DIY camera above eight black plastic screws and four black plastic hex nuts with 3pin to 3pin JST PH cable and adhesive sticker.
Once you've picked up your MEMENTO Camera and you're ready to take it out into the world, here is a chic and minimalist enclosure that will look great on the...
guides with product
$9.95
In Stock
Angle Front Shot of the MEMENTO LED Plate.
This product is just the LED ring add-on board for the MEMENTO camera kit pack.
guides with product
$4.95
In Stock
USB Type A to Type C Cable - approx 1 meter / 3 ft long
As technology changes and adapts, so does Adafruit. This  USB Type A to Type C cable will help you with the transition to USB C, even if you're still...
$4.95
In Stock
Angled shot of a microSD card reader with a key chain plugged into a laptop port.
This is the cutest little USB C microSD Card Reader/Writer, but don't be fooled by its adorableness! Simply pop the card into the edge and plug it into your...
Out of Stock
Hand removing/installing micro SD card from SD adapter
Add mega-storage in a jiffy using this 8 GB class 4 micro-SD card. It comes with a SD adapter so you can use it with any of our shields or adapters. Preformatted to FAT so it works out...
$9.95
In Stock
Micro SD card
Add speedy mega-storage in a jiffy using this 16 GB Class 10 micro-SD card. It comes with a SD adapter so you can use it with any of our shields or adapters! Preformatted to FAT so it...
$19.95
In Stock
Angel shot of Small microSD card 512mb
Add storage in a jiffy using this 512MB microSD card. Preformatted to FAT32, so it works out of the packaging with our projects. Works great with any device in the...
$4.95
In Stock
Angled shot of Small microSD card 256mb
Add storage in a jiffy using this 256MB microSD card. Preformatted to FAT32, so it works out of the packaging with our projects. Works great with any device in the...
$4.50
In Stock