3D Printed Parts

STL files for 3D printing are oriented to print "as-is" on FDM style machines. Parts are designed to 3D print without any support material using PLA filament. Original design source files may be downloaded using the links below.

Slice with Settings for PLA material 

The parts were sliced using CURA using the slice settings below.

• PLA filament 200c extruder
• 0.2 layer height
• 10% gyroid infill
• 60mm/s print speed
• 60c heated bed

This snap fit enclosure for MEMENTO features an LED ring diffuser. The two halves can be printed without any supports and snap fit together without any fasteners. It features access to all of the on-board components and the expansion ports. It also features a spot for a threaded tripod screw insert.

Design Source Files

The project assembly was designed in Fusion 360. This can be downloaded in different formats like STEP, STL and more. Electronic components like Adafruit's boards, displays, connectors and more can be downloaded from the Adafruit CAD parts GitHub Repo.