This is a DIY multimedia dial. It rotates like a knob and clicks like a mouse. Turn a rotary encoder into a media controller!
It works well as an assignable USB controller that you can program to do just about anything you want.
It’s powered by Adafruit’s Circuit Python so you can quickly program it to run key commands in any application.
So you can use it to edit videos, control youtube or even scroll through long documents.
Inside the 3D printed knob is a rotary encoder and NeoPixel ring. As you turn the knob, an LED follows the direction making it easy to see where it is.
This uses the Adafruit HID Library for Circuit Python. All of the key codes are listed in the docs so it’s easy to customize your own key commands.
It’s powered by Adafruit’s Trinket M0 and runs Circuit Python.
Prerequisite Guides
If your new to electronics and CircuitPython, I suggest you walk through the following guides to get the basics. The Adafruit Feather M0 Express guide will walk you through setting it up with CircuitPython. See the DotStar guide for more information on how they work.
Page last edited March 08, 2024
Text editor powered by tinymce.
