# Meat Skull Centerpiece
## Overview
Make a horrific-yet-delicious Meat Skull Centerpiece for your next Halloween party! The MONSTER M4SK is our all-in-one, dual-display animated eyeball animation kit that you can easily use to bring this tasty decapitated head to life! The lenses and lens holders make those peepers really pop from their fleshy sockets.
Inspired by [this recipe](https://www.today.com/recipes/zombie-cheese-prosciutto-skull-halloween-party-recipe-t117751) from the Today Show, we decided to up the creepy quotient a bit! Add MONSTER M4SK eyes and sliced prosciutto, capocollo, mortadella, and salami to a plastic-wrap covered foam skull to make a spooky/yummy three dimensional serving platter! Will your house guests be bold enough to peel off a slice of flesh to go with their crackers and beverages?
https://www.youtube.com/watch?v=RFYR8djrwfU
## Parts
### Adafruit MONSTER M4SK - DIY Electronic Eyes Mask
[Adafruit MONSTER M4SK - DIY Electronic Eyes Mask](https://www.adafruit.com/product/4343)
**Peep dis!** Have you always wanted to have another pair of eyes on the back of your head? Or outfit your costume with big beautiful orbs? The MONSTER M4SK [is like the Hallowing](https://www.adafruit.com/product/3900) but _twice_ as good, with two gorgeous...
Out of Stock
[Buy Now](https://www.adafruit.com/product/4343)
[Related Guides to the Product](https://learn.adafruit.com/products/4343/guides)
### Clear Acrylics and Hardware Kit for Monster M4sk
[Clear Acrylics and Hardware Kit for Monster M4sk](https://www.adafruit.com/product/4330)
Here is the perfect kit for mounting [convex lenses](https://www.adafruit.com/?q=convex%20lens%20edge) (glass _or_ plastic) to your [Monster M4sk](https://www.adafruit.com/product/4343)! These acrylics has been laser-cut specifically for lenses...
In Stock
[Buy Now](https://www.adafruit.com/product/4330)
[Related Guides to the Product](https://learn.adafruit.com/products/4330/guides)
### Convex Plastic Lens with Edge
[Convex Plastic Lens with Edge](https://www.adafruit.com/product/3917)
The eyes have it! Add this little lens to make a big expression with our Spooky Eyes demo for microcontrollers or Raspberry Pi. These are plastic lenses, with brilliant clarity and a nice convexity (is that a word?) They've even got a lip-edge so you can mount them easily with a 38mm...
In Stock
[Buy Now](https://www.adafruit.com/product/3917)
[Related Guides to the Product](https://learn.adafruit.com/products/3917/guides)
### Lithium Ion Polymer Battery with Short Cable - 3.7V 420mAh
[Lithium Ion Polymer Battery with Short Cable - 3.7V 420mAh](https://www.adafruit.com/product/4236)
Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 420mAh for a total of about 1.55 Wh. If you need a larger (or smaller!) battery,
In Stock
[Buy Now](https://www.adafruit.com/product/4236)
[Related Guides to the Product](https://learn.adafruit.com/products/4236/guides)
## Tools, Materials & Supplies
In addition to the parts listed above, you'll also need:
- Decorative prop skull -- preferably made of styrofoam, [such as this one](https://www.michaels.com/8.5-in-hanging-foam-skull-by-ashland/10596775.html)
- Serving platter
- Two 3oz. packages of sliced prosciutto
- One 3oz. package each of capocollo, mortadella, and Calabrese salami (OK you can use any sliced meats you like, it's your party!)
- Plastic cling wrap
- Toothpicks
- Crackers
Optional: Brain Jell-O mold and red Jell-O
# Meat Skull Centerpiece
## Build the Meat Skull
Our first step is to prepare the prop skull by making it food safe. The prop skull is most definitely not a food safe surface. We'll do this by covering it with plastic cling wrap.
## Plastic Wrap
Wrap the skull in a layer of cling wrap.
Use a knife or scissors to cut out the teeth and nose area, since those won't have any meat on them.
If you have a foam skull you can use toothpicks to conform the wrap to the surface curvature a bit more. This will help preserve the skull bone definition when we lay the meat slices on it.
## M4SK/Eyes Setup
Next, set up your MONSTER M4SK to have creepy eyes! Follow the [main guide quickstart instructions](https://learn.adafruit.com/adafruit-monster-m4sk-eyes/foo-2) to get the M4\_Eyes.UF2 running.
I created some cherry tomato style eyes by adjusting some settings for the **demon** eyes that come with the[eye graphics download](https://learn.adafruit.com/adafruit-monster-m4sk-eyes/graphics).
Here is the adjusted `config.eye` file I created:
```auto
{
"eyeRadius" : 125,
"irisRadius" : 40,
"eyelidIndex" : "0x00", // From table: learn.adafruit.com/assets/61921
"pupilColor" : [ 0, 0, 0 ],
"pupilMin" : 0.05,
"pupilMax" : 0.25,
"backColor" : [ 80, 0, 0 ],
// From www.deviantart.com/suicidecrew/art/Fire-Seamless-tile-116721709
"irisTexture" : "demon/iris.bmp",
"scleraTexture" : "demon/sclera.bmp",
"tracking" : false,
"left" : {
},
"right" : {
}
}
```
With the **demon** directory copied to your M4SK, save the `config.eye` file with those settings to the root directory of the board.
Add the battery, lenses, lens holders, and elastic headband + tri-glides (or other method for securing them) [as shown here](https://learn.adafruit.com/adafruit-monster-m4sk-eyes/lens-holders), and slip the goggles onto the skull.
## Eyes Protection
You can now add a strip of cling wrap to protect the M4SK and headband from the meats. Just cut out a couple of holes for the lenses to poke through, and make a small slit for the USB plug for charging later.
The skull is ready for meat application!
## Meating the Skull
I found it best to start with a layer of prosciutto to lay the foundation. Don't be afraid to tear it into strips to fit the direction of the muscle flow of the skull.
You can then start to build up the appearance by using the other meats as contrasting colors and shapes.
As you encircle the eye lenses be sure to leave a small gap for inserting the USB cable into the MONSTER M4SK as well as accessing the on/off switch.
You can layer up as many slices as you want, and when you're ready to present your centerpiece, be sure to add some crackers!
You Meat Skull Centerpiece is ready to entertain (and freak out) your guests. For enhanced effect, turn the lights down low and add a bit of dry ice to the tray.
Buon appetito!
https://www.youtube.com/watch?v=RFYR8djrwfU
# Meat Skull Centerpiece
## Bonus Brain
Here's a fun add-on project for when your guests tire of sliced, preserved meats -- the Jell-O Brain Skull!
For this, we'll use a readily available "Zombie Brain Jell-O mold".
## Make a Brain
Mix up a batch of gelatin, as per the instructions on the box. Red flavors work quite well! It's a good idea to mix it in a bowl and stirring well before pouring it into the mold.
Spray some non-stick vegetable oil spray into the mold to act a a mold release before pouring in the gelatin mixture.
Let it set up in the refrigerator, at least 4 hours.
## Saw the Skull Cap
Mark a line around the top of the skull where you want to remove it. This is the flat spot on which the Jell-O will sit.
Use a thin bladed hand saw or bread knife to cut along the line.
## Brain Transfer
Place the skull on top of the Jell-O mold.
Carefully turn the entire assembly upside down to release the brain onto the skull.
Place your MONSTER M4SK into the skull's eye sockets (you can secure it with tape or toothpicks through the mounting holes if you like) and your delicious dessert is ready for spooning into small bowls and eating!
Please note, the bottom layer should be avoided so nobody eats styrofoam. If you want to be extra careful, cut out a paper plate by tracing the skull cap and place it under the Jell-O.
## Featured Products
### Adafruit MONSTER M4SK - DIY Electronic Eyes Mask
[Adafruit MONSTER M4SK - DIY Electronic Eyes Mask](https://www.adafruit.com/product/4343)
**Peep dis!** Have you always wanted to have another pair of eyes on the back of your head? Or outfit your costume with big beautiful orbs? The MONSTER M4SK [is like the Hallowing](https://www.adafruit.com/product/3900) but _twice_ as good, with two gorgeous...
Out of Stock
[Buy Now](https://www.adafruit.com/product/4343)
[Related Guides to the Product](https://learn.adafruit.com/products/4343/guides)
### Clear Acrylics and Hardware Kit for Monster M4sk
[Clear Acrylics and Hardware Kit for Monster M4sk](https://www.adafruit.com/product/4330)
Here is the perfect kit for mounting [convex lenses](https://www.adafruit.com/?q=convex%20lens%20edge) (glass _or_ plastic) to your [Monster M4sk](https://www.adafruit.com/product/4343)! These acrylics has been laser-cut specifically for lenses...
In Stock
[Buy Now](https://www.adafruit.com/product/4330)
[Related Guides to the Product](https://learn.adafruit.com/products/4330/guides)
### AdaBox013 - THE MONSTER M4SK
[AdaBox013 - THE MONSTER M4SK](https://www.adafruit.com/product/4281)
_I was hacking in the lab quite late one night - soldering pins and debugging the bytes
When suddenly a bang exploded with sparks, and a figure emerged from the hazy dark!
(It wore a mask) It wore a monster mask!
(The monster mask) Its eyes were LCD glass
(It wore a..._
No Longer Stocked
[Buy Now](https://www.adafruit.com/product/4281)
[Related Guides to the Product](https://learn.adafruit.com/products/4281/guides)
### Convex Glass Lens with Edge - 40mm Diameter
[Convex Glass Lens with Edge - 40mm Diameter](https://www.adafruit.com/product/3853)
The eyes have it! Add this little lens to make a big expression with our Spooky Eyes demo for microcontrollers or Raspberry Pi. These are gorgeous glass (_not plastic/acrylic!_) lenses, with brilliant clarity and a nice convexity (is that a word?) They've even got a lip-edge so you...
In Stock
[Buy Now](https://www.adafruit.com/product/3853)
[Related Guides to the Product](https://learn.adafruit.com/products/3853/guides)
### Lithium Ion Polymer Battery with Short Cable - 3.7V 420mAh
[Lithium Ion Polymer Battery with Short Cable - 3.7V 420mAh](https://www.adafruit.com/product/4236)
Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 420mAh for a total of about 1.55 Wh. If you need a larger (or smaller!) battery,
In Stock
[Buy Now](https://www.adafruit.com/product/4236)
[Related Guides to the Product](https://learn.adafruit.com/products/4236/guides)
## Related Guides
- [Adafruit MONSTER M4SK](https://learn.adafruit.com/adafruit-monster-m4sk-eyes.md)
- [Add MONSTER M4SK to your Costume Mask](https://learn.adafruit.com/add-monster-m4sk-to-your-costume-mask.md)
- [Cappy Monster M4sk with Animated Eyes](https://learn.adafruit.com/cappy-monster-m4sk.md)
- [Goose Game M4SK Controller](https://learn.adafruit.com/goose-game-m4sk-controller.md)
- [Program CircuitPython USB Devices with iPhone & iPad](https://learn.adafruit.com/use-circuitpython-devices-with-iphone-ipad.md)
- [EYE SHOOTOUT: Contrasting Open Source and Big Retail Electronics](https://learn.adafruit.com/eye-shootout-contrasting-open-source-and-big-retail-electronics.md)
- [Living Ventriloquist Dummy with MONSTER M4SK Eyes](https://learn.adafruit.com/living-ventriloquist-dummy-with-monster-m4sk-eyes.md)
- [Spruce Up a Costume with MONSTER M4SK Eyes and Voice](https://learn.adafruit.com/spruce-up-a-costume-with-monster-m4sk-eyes-and-voice.md)
- [Boglin MONSTER M4SK Mod](https://learn.adafruit.com/boglin-monster-m4sk-mod.md)
- [Monster M4sk Is Watching You](https://learn.adafruit.com/monster-m4sk-is-watching-you.md)
- [Fish Head MONSTER M4SK Eyes](https://learn.adafruit.com/wide-set-monster-m4sk-creature-eyes.md)
- [CustomEyesation: DIY Monster M4SK Graphics](https://learn.adafruit.com/customeyesation-diy-monster-m4sk-graphics.md)
- [MONSTER M4SK Toon Hat](https://learn.adafruit.com/monster-mask-augmented-eyes-toon-hat.md)
- [Animatronic Fizzgig MonsterM4sk Puppet](https://learn.adafruit.com/animatronic-fizzgig-monsterm4sk-puppet.md)
- [AdaBox 009](https://learn.adafruit.com/adabox009.md)