In this tutorial, you will learn how to connect temperature sensor to a BeagleBone Black.
Because the BBB runs Linux, there are many ways in which it can be programmed. In this tutorial we show how to read analog values form a TMP36 temperature sensor using Python.

The temperature sensor chip used is the TMP36. You can find out more about this chip here: http://learn.adafruit.com/tmp36-temperature-sensor/overview

This guide was first published on Jun 27, 2013. It was last updated on Jun 27, 2013.

This page (Overview) was last updated on Nov 28, 2021.

Text editor powered by tinymce.