The examples in this guide are no longer supported. Please check out the MCP4725 12-Bit DAC Tutorial guide for CircuitPython and Python usage: https://learn.adafruit.com/mcp4725-12-bit-dac-tutorial
The easiest way to hook the MCP4725 up to your Pi is with the Adafruit Pi Cobbler, as seen in the wiring diagram below:
The output voltage will be visible on VOUT, which you should connect to your target device, or to a multimeter or oscilloscope if you just want to see the results.
Page last edited March 08, 2024
Text editor powered by tinymce.