Image credit: keyhive.xyz

In this guide, you'll learn how to set up your May Pad macropad to use KMK firmware. You'll use the May Pad, designed by /u/reggatronics, and the new Adafruit KB2040, to build a macropad that you'll put KMK firmware on and will also learn how to remap it and create your own configuration.

What is KMK?

KMK is a feature-rich and beginner-friendly firmware for computer keyboards written and configured in CircuitPython.

What is the May Pad?

A through hole kit using a pro micro footprint and through hole diodes! It can be a 20 key macropad or a numpad!

Printed cases here: https://keyhive.xyz/shop/may-pad-3d-printed-case

It includes everything you need except for switches and a USB cable

  • PCB
  • bottom plate
  • diodes
  • pro micro
  • screws
  • standoffs

Parts

May Pad Kit

A through hole kit using a pro micro footprint and through hole diodes! Can be a 20 key macropad or a numpad!

$18.00

Angled shot of short pink microcontroller.
A wild Kee Boar appears! It’s a shiny KB2040! An Arduino Pro Micro-shaped board for Keebs with RP2040. (#keeblife 4 evah) A lot of folks like using Adafruit...
$8.95
In Stock
USB Type A to Type C Cable - approx 1 meter / 3 ft long
As technology changes and adapts, so does Adafruit. This  USB Type A to Type C cable will help you with the transition to USB C, even if you're still...
$4.95
In Stock

This guide was first published on Feb 01, 2022. It was last updated on 2022-02-01 16:38:52 -0500.

This page (Overview) was last updated on May 15, 2022.

Text editor powered by tinymce.