Parts List

STL files for 3D printing are oriented to print "as-is" on FDM style machines. Parts are designed to 3D print with minimal support material. Original design source may be downloaded using the links below.

  • Left-Matrix-Handle.stl
  • Right-Matrix-Handle.stl

Fusion360 links

Slicing Parts

Slice with setting for PLA material. The parts were sliced using CURA using the slice settings below.

  • PLA filament 215c extruder
  • 0.2 layer height
  • 10% gyroid infill
  • 60mm/s print speed
  • 60c heated bed
  • 4% support density

This guide was first published on Sep 23, 2020. It was last updated on Sep 23, 2020.

This page (3D Printing) was last updated on Sep 22, 2020.

Text editor powered by tinymce.