We designed a 3D printed bracket for the display and sensor so the parts are nicely secured.

You can use a screw or nail to hang it on a wall with our 3D printed bracket.

The bracket is secured to the heat set inserts that are built into the frame of the display.

The sensor is press fitted into the case with openings on the side for the cables.

The cover snap fits over the case and features holes to allow air to reach the sensor.

 

The bracket and enclosure parts are 3d printed without any support material using PLA filament.

The Wall hanger is attached the Matrix with M3 screws.

Parts List

STL files for 3D printing are oriented to print "as-is" on FDM style machines. Parts are designed to 3D print without any support material. Original design source may be downloaded using the links below.

Medium Sized Matrix (Adabox 16)

Large Matrix PID: 2276 (https://www.adafruit.com/product/2276)

  • CO2Bracket-LG
  • CO2-Wall-Hang-LG.stl
  • Wall-Hang-LG

Slicing Parts

Slice with settings for PLA material. The parts were sliced using CURA using the slice settings below.

  • PLA filament 215c extruder
  • 0.2 layer height
  • 10% gyroid infill
  • 60mm/s print speed
  • 60c heated bed

Case Assembly

 

The bracket is secured to the enclosure using M2.5 hardware screws and hex nuts.

The bracket is secured to the heat set inserts that are built into the frame of the display.

 

The sensor is press fitted into the case with openings on the side for the cables.

The cover snap fits over the case and features holes to allow air to reach the sensor.

This guide was first published on Feb 02, 2021. It was last updated on 2021-02-17 09:50:25 -0500.

This page (3D Printed Sensor Case) was last updated on Apr 02, 2021.

Text editor powered by tinymce.