Still image of a Adafruit RGB Matrix Bonnet powering a Matrix.
You can now create a dazzling display with your Raspberry Pi with the Adafruit RGB Matrix Bonnet. These boards plug into your Pi and make it...
$14.95
In Stock
Video of two hands flipping over a powered on 64x64 RGB LED Matrix. The matrix display has a falling colored sand effect.
Winter time can be rough in the city. The sky is gray. The weather is unpredictable. So slough off those seasonal blues with some Times Square razzle dazzle from this...
$54.95
In Stock
Angled shot of a Male DC Power adapter - 2.1mm plug
If you need to connect a battery pack or wired power supply to a board that has a DC jack - this adapter will come in very handy! There is a 2.1mm DC plug on one end, and a screw...
$2.00
In Stock
Angled shot of 16mm red panel mount pushbutton.
OK, this item is pretty simple - it's a panel mount pushbutton. It's not that exciting, no LEDs, no bells & whistles. But we really like it anyways – look at that...
Out of Stock
Angled shot of PowerBoost 1000 Charger.
PowerBoost 1000C is the perfect power supply for your portable project! With a built-in load-sharing battery charger circuit, you'll be able to keep your power-hungry...
$19.95
In Stock
Top down view of a Adafruit LIS3DH Triple-Axis Accelerometer.
The LIS3DH is a very popular low power triple-axis accelerometer. It's low-cost, but has just about every 'extra' you'd want in...
$4.95
In Stock
Breadboard-friendly SPDT Slide Switch
These nice switches are perfect for use with breadboard and perfboard projects. They have 0.1" spacing and snap in nicely into a solderless breadboard. They're easy to switch...
$0.95
In Stock
Angled shot of Raspberry Pi Zero W computer with headers.
If you didn't think that the Raspberry Pi Zero W could possibly get any better, then boy do we have a pleasant surprise for you! The new Raspberry Pi Zero...
$16.00
In Stock
Glamor shot of Ultimaker 2+ 3D Printer
The Ultimaker 2+ is one of our favorite 3D printers on the market. It's a well-built open-source compact machine with an excellent UX. Every inch of the...
Discontinued
Filament for 3D printers in various colors and types stacked together.
Having a 3D printer without filament is sort of like having a regular printer without paper or ink.  And while a lot of printers come with some filament there's a good chance...
Out of Stock