The 3D printed parts are fairly easy to make with most common home desktop 3D printers that are on the market.

And if you don’t have access a 3D printer, you can order our parts by visiting our Thingiverse page and have someone local 3D print the parts and ship them to you. 

Our LED Matrix hole spacing has been updated causing the original STL files not work. An updated set of STLs are available thanks to @KDLaun.

Slice Settings


Download the STL file and import it into your 3D printing slicing software. You'll need to adjust your settings accordingly if you're using material different than PLA.


  • 230C Extruder Temp
  • No heated bed (65C for heated)
  • 1.0 Extrusion Multiplier
  • .8mm Nozzle
  • 0.7 Extrusion Width
  • .2mm Layer Height
  • 30% infill
  • 30% Supports
  • skirt
  • 60mm/s | 120mm travel speed



Use the mirror function inside your slicing software to print the opposite handle 

This guide was first published on Feb 28, 2018. It was last updated on May 03, 2024.

This page (3D Printing) was last updated on Mar 08, 2024.

Text editor powered by tinymce.