Video of a white hand pressing a button to briefly turn an LED strip into white lights. Also wired up to the microcontroller are a servo motor and a speaker.
Featured
The Adafruit Feather series gives you lots of options for a small, portable, rechargeable microcontroller board. By picking a feather and stacking on a FeatherWing you can create advanced projects quickly. One popular combo is our Feather M4...
view other guides that use this product
$19.95 each
In Stock
Adafruit NeoPixel Digital RGB LED Strip with all the LEDs in a rainbow
Featured
So thin. So mini. So teeeeeeny-tiny. It's the 'skinny' version of our classic NeoPixel strips!These NeoPixel strips have 144 digitally-addressable pixel Mini LEDs per meter and are very affordable and are only 7.5 mm wide (0.3") if you remove the strip from the...
view other guides that use this product
$59.95 each
In Stock
Lithium Ion Cylindrical Battery - 3.7v 2200mAh with JST PH connector
Featured
Need a big battery for your project? This lithium-ion battery contains a 2200mAh and a protection circuit that provides over-voltage, under-voltage, and over-current protection. Yet, it is slim and easy to fit into many project cases.This cell can provide 2C of...
$9.95 each
In Stock
Front shot of JST-PH Battery Extension Cable.
Featured
By popular demand, we now have a handy extension cord for all of our JST PH-terminated battery packs (such as our LiIon/LiPoly and 3xAAA holders). One end has a JST-PH compatible socket, and the other end has a matching plug. Between the two, 500mm of color coded wire. Handy for wearable...
$1.95 each
In Stock
Mini Oval Speaker with Short Wires
Featured
Hear the good news! This wee speaker is a great addition to any audio project where you need 8 ohm impedance and 1W or less of power. We particularly like this speaker as it is small and comes with nice skinny wires with a connector on the end. It has a handy...
$1.95 each
In Stock
Small, black, SPDT slide switch.
Featured
These nice switches are perfect for use with breadboard and perfboard projects. They have 0.1" spacing and snap in nicely into a solderless breadboard. They're easy to switch no matter what size fingers you have, but not so easy that they'll get flipped by accident. Work great as...
Out of Stock
Top view shot of a red and black JST PH 2-Pin Cable to Female Connector - 100mm.
Red and black tinned wires with a 2-pin JST PH connector on the end. 4" / 100mm long. Matches up nicely with our Lipoly chargers!We have the socket 'mating' version of this cable over here,
$0.75 each
In Stock
1.25mm Pitch 2-pin Cable Matching Pair
When 0.1" is too big, and JST PH's too chunky, these ultra-slim 1.25mm connectors are a reliable alternative. These are only 1.25mm pitch, but have a nice clicky connection.These cables are nice and long, 40cm in fact. They've got both small form factor and are a...
$0.95 each
In Stock
Top view shot of JST PH 2-Pin Cable - Male Header - 200mm.
For a really long time we assumed that the JST PH didn't have a free-hanging male header version. But then we found this JST-PH 2-pin Male Cable, and we were like, this is perfect! It's not a genuine JST connector, but it's 100%...
$0.75 each
In Stock