Adafruit Library for Fritzing

The wiring diagram below provides a visual reference for connecting the components. It is not true to scale, it is just meant to be used as reference. This diagram was created using the Fritzing software package.

Take a moment to review the components in the circuit diagram. This illustration is meant for referencing wired connections - the length of wire, position and size of components are not exact. 

Wired Connections

• The two NeoPixel strips (72 pixels each), and speaker are each connected to pins on the screw block terminal.
• The slide switch is connected to the EN and GND pins on the Feather.
• A 500mAh battery is connected to the battery port on the Feather via an 2 Pin JST extension cable.