Video of a white hand pressing a button to briefly turn an LED strip into white lights. Also wired up to the microcontroller are a servo motor and a speaker.
The Adafruit Feather series gives you lots of options for a small, portable, rechargeable microcontroller board. By picking a feather and stacking on a FeatherWing you can create...
guides with product
$19.95
In Stock
Hand holding NeoPixel Ring with 24 x 5050 RGB LED, lit up rainbow
Round and round and round they go! 24 ultra bright smart LED NeoPixels are arranged in a circle with 2.6" (66mm) outer diameter. The rings are 'chainable' - connect the...
guides with product
$16.95
In Stock
Continuous Rotation Servo with three pin cable
This servo rotates fully forward or backward instead of moving to a position. You can use any servo code, hardware, or library to control these servos. Good for making simple moving...
$11.95
In Stock
Video of 24mm mini translucent clear LED arcade button flashing on and off.
A button is a button, and a switch is a switch, but these translucent arcade buttons are in a class of their own. Particularly because they have LEDs built right in!...
$2.50
In Stock
Angled Shot of the Speaker - 40mm Diameter - 4 Ohm 3 Watt.
Hear the good news! This speaker is a great addition to any audio project where you need a 4 Ohm impedance and 3W or less of power.At 40mm diameter it...
$4.95
In Stock
Lithium Ion Cylindrical Battery - 3.7v 2200mAh with JST PH connector
Need a big battery for your project? This lithium-ion battery contains a 2200mAh and a protection circuit that provides over-voltage, under-voltage, and over-current protection. Yet,...
$9.95
In Stock
Breadboard-friendly SPDT Slide Switch
These nice switches are perfect for use with breadboard and perfboard projects. They have 0.1" spacing and snap in nicely into a solderless breadboard. They're easy to switch...
$0.95
In Stock
Front shot of JST-PH Battery Extension Cable.
By popular demand, we now have a handy extension cord for all of our JST PH-terminated battery packs (such as our LiIon/LiPoly and 3xAAA holders). One end has a JST-PH compatible...
Out of Stock