Magikoopa Wand

You can build Kamek's Magic Wand from Super Mario Bros!

We designed and 3D printed a magic wand inspired by Kamek the Magikoopa in the Super Mario Brothers movie. It’s got motion activated lights and sound with a spinning crystal gem.

Powered by the Adafruit RP2040 Prop-Maker Feather, this advanced prop uses an accelerometer to detect swings and hits that trigger super bright NeoPixels with full sound effects!


Prop-Maker Feather

The Prop-Maker Feather was designed for creating advanced props using motion, lights and sound. The LIS3DH accelerometer can detect steps, swings and hits. It has an on-board class-D audio amp for blasting sound effects. For creating stunning lighting effects, the built-in NeoPixel driver and 3W RGB LED driver are essential.

Terminal Block Port - With easy-to-use screw terminals you can quickly connect and disconnect, lights, speakers and buttons!

Servo Connection - Plug any hobby servo with 3 wires into the 0.1" spaced header, and you can have quick motion control!


Video of a white hand pressing a button to briefly turn an LED strip into white lights. Also wired up to the microcontroller are a servo motor and a speaker.
The Adafruit Feather series gives you lots of options for a small, portable, rechargeable microcontroller board. By picking a feather and stacking on a FeatherWing you can create...
In Stock
Hand holding NeoPixel Ring with 24 x 5050 RGB LED, lit up rainbow
Round and round and round they go! 24 ultra bright smart LED NeoPixels are arranged in a circle with 2.6" (66mm) outer diameter. The rings are 'chainable' - connect the...
In Stock
Continuous Rotation Servo with three pin cable
This servo rotates fully forward or backward instead of moving to a position. You can use any servo code, hardware, or library to control these servos. Good for making simple moving...
In Stock
Video of 24mm mini translucent clear LED arcade button flashing on and off.
A button is a button, and a switch is a switch, but these translucent arcade buttons are in a class of their own. Particularly because they have LEDs built right in!...
In Stock
Angled shot of ten 20 cm long quick-connect wire pairs.
Quick connector wire sets will make wiring up our arcade-style or metal buttons quicky-quick. Each wire comes as a 'pair' with two 0.11" quick-connects pre-crimped onto...
In Stock
Angled Shot of the Speaker - 40mm Diameter - 4 Ohm 3 Watt.
Hear the good news! This speaker is a great addition to any audio project where you need a 4 Ohm impedance and 3W or less of power.At 40mm diameter it...
In Stock
Breadboard-friendly SPDT Slide Switch
These nice switches are perfect for use with breadboard and perfboard projects. They have 0.1" spacing and snap in nicely into a solderless breadboard. They're easy to switch...
In Stock
Lithium Ion Cylindrical Battery - 3.7v 2200mAh with JST PH connector
Need a big battery for your project? This lithium-ion battery contains a 2200mAh and a protection circuit that provides over-voltage, under-voltage, and over-current protection. Yet,...
In Stock
Front shot of JST-PH Battery Extension Cable.
By popular demand, we now have a handy extension cord for all of our JST PH-terminated battery packs (such as our LiIon/LiPoly and 3xAAA holders). One end has a JST-PH compatible...
In Stock
12 x M2.5x6mm Screws
M2.5x6mm Screws

This guide was first published on Jul 04, 2023. It was last updated on Jul 14, 2024.

This page (Overview) was last updated on Mar 08, 2024.

Text editor powered by tinymce.