Grab your six head panels: face-plate, top, sides, back, and bottom. We'll be assembling them in that order.
Apply hot-glue on the edge where the panels make contact, and on the inside corner for added stability.
Add the sides next.
Back.
(we'll be putting magnets in the holes in the corners of the panel later)
(we'll be putting magnets in the holes in the corners of the panel later)
Orient the bottom panel with the mounting holes closest to the back of the head.
One more step!
This spacer will help stabilize and strengthen the neck.
Don't be too picky if you drop a glob of glue here and there on the parts... just use your fingernail to scrape it off.
Not enough detail?
Each step includes an archive (blue button below) that contains additional photos that might help fill-in any gaps.Page last edited October 12, 2013
Text editor powered by tinymce.