Eyes, Ears, yadda yadda

Congratulations! You can un-plug Stanley now... and relax!
Part 2 will cover all the electronics needed to give your robot a little personality:
  • Arduino UNO R3
  • 16-Channel PWM/Servo Shield
  • 9g Servos (qty 3)
  • 1.2" 8x8 LED Matrix (qty 2)
  • NeoPixel Stick
  • 315MHz Receiver (momentary), and a 4-Button Keyfob
  • 5v 2A Switching Power Supply
  • 2.1mm Jack to Screw Terminal Adapter

So... have you picked a name for your robot yet?
This guide was first published on Oct 13, 2013. It was last updated on Oct 13, 2013. This page (Eyes, Ears, yadda yadda) was last updated on May 04, 2015.