# Makey Paper Craft ## Overview https://youtu.be/l9SLMLViJng ![](https://cdn-learn.adafruit.com/assets/assets/000/054/109/medium800thumb/circuit_playground_hero-loop.jpg?1526672937) This paper craft Makey is perfect for setting up at your maker faire booth or any event! we can make this completely out of card stock or card board! Connect a micro servo to enable waving action to greet an audience! The Circuit Playground Express drives the micro servo and is activated by two on board push buttons. Or use MakeCode to activate with one of the many sensors on board like light, sound, temperature and even motion! ![](https://cdn-learn.adafruit.com/assets/assets/000/054/110/medium800thumb/circuit_playground_cp-box-loop.jpg?1526674454) ### Part: M2x6mm Screws quantity: 1 M2x6mm Screws [M2x6mm Screws](https://www.albanycountyfasteners.com/2MM-x-4-Phillips-Flat-Head-Machine-Screw-p/1011-1000.htm) ### Part: M3 x 6mm Screws quantity: 1 M3 x 6mm Screws [M3 x 6mm Screws](https://www.albanycountyfasteners.com/3-MM-x-5-Phillips-Flat-Head-Machine-Screw-p/1011-1006.htm) ### Part: M3 brass male-female standoff(5mm + 6mm) quantity: 4 M3 brass male-female standoff(5mm + 6mm) [M3 brass male-female standoff(5mm + 6mm)](http://a.co/h0YPLKh) ### Part: Chipboard Medium Weight quantity: 1 12x12inch 25qt pack – 30pt (624gsm / 0.8mm) [Chipboard Medium Weight](http://a.co/dSiDTzx) ### Circuit Playground Express [Circuit Playground Express](https://www.adafruit.com/product/3333) **Circuit Playground Express** is the next step towards a perfect introduction to electronics and programming. We've taken the original Circuit Playground Classic and made it even better! Not only did we pack even more sensors in, we also made it even easier to... In Stock [Buy Now](https://www.adafruit.com/product/3333) [Related Guides to the Product](https://learn.adafruit.com/products/3333/guides) ![A Black woman's manicured hand holds a round microcontroller with lit up LEDs.](https://cdn-shop.adafruit.com/640x480/3333-05.jpg) ### Small Alligator Clip to Male Jumper Wire Bundle - 12 Pieces [Small Alligator Clip to Male Jumper Wire Bundle - 12 Pieces](https://www.adafruit.com/product/3255) For bread-boarding with unusual non-header-friendly surfaces, these cables will be your best friends! No longer will you have long strands of alligator clips that are grabbing little wires. These compact jumper cables have a premium male header on one end, and a grippy mini alligator clip on... Out of Stock [Buy Now](https://www.adafruit.com/product/3255) [Related Guides to the Product](https://learn.adafruit.com/products/3255/guides) ![ Bundle of Small Alligator Clip to Male Jumper Wires](https://cdn-shop.adafruit.com/640x480/3255-02.jpg) ### Micro servo [Micro servo](https://www.adafruit.com/product/169) Tiny little servo can rotate approximately 180 degrees (90 in each direction) and works just like the standard kinds you're used to but _smaller_. You can use any servo code, hardware, or library to control these servos. Good for beginners who want to make stuff move without... Out of Stock [Buy Now](https://www.adafruit.com/product/169) [Related Guides to the Product](https://learn.adafruit.com/products/169/guides) ![Micro servo with three pin cable](https://cdn-shop.adafruit.com/640x480/169-06.jpg) ### 3 x AAA Battery Holder with On/Off Switch and 2-Pin JST [3 x AAA Battery Holder with On/Off Switch and 2-Pin JST](https://www.adafruit.com/product/727) This battery holder connects 3 AAA batteries together in series for powering all kinds of projects. We spec'd these out because the box is slim, and 3 AAA's add up to about 3.3-4.5V, a very similar range to Lithium Ion/polymer (Li-Ion) batteries and have an on-off switch. That makes... In Stock [Buy Now](https://www.adafruit.com/product/727) [Related Guides to the Product](https://learn.adafruit.com/products/727/guides) ![Front angled shot of 3 x AAA battery holder with on-off switch and 2-pin JST PH connector.](https://cdn-shop.adafruit.com/640x480/727-07.jpg) # Makey Paper Craft ## Circuit Diagram Take a moment to review the components in the circuit diagram. This illustration is meant for referencing wired connections - The length of wire, position and size of components are not exact. ![](https://cdn-learn.adafruit.com/assets/assets/000/054/112/medium800/circuit_playground_circuit-diagram.jpg?1526676351) **Ground** ( **Brown** ) connects to **GND** on the Circuit Playground **Power** ( **Red** ) connects to **VOUT** **Signal** ( **Yellow** ) connects to **A1** Battery connects to the **JST**  port on the Circuit Playground Express # Makey Paper Craft ## Code The Makecode activates the claw when the Circuit Playground Express detects light. Use the link below to open the code in a modern web browser: [Open the Project Code in MakeCode](https://makecode.com/_2dMR5sKapXpM) ![](https://cdn-learn.adafruit.com/assets/assets/000/054/113/medium800/circuit_playground_makey-makecode.jpg?1526676622) ## WebUSB Downloading MakeCode can download code direct to your Circuit Playground Express with the Chrome web browser by [following this guide](https://learn.adafruit.com/makecode/webusb). You can then open the project code here: [https://makecode.com/\_2dMR5sKapXpM](https://makecode.com/_2dMR5sKapXpM) This means code edit will upload directly to the Circuit Playground Express without the need to drag and drop file onto it! Follow the instruction to set up your board and you'll be able to quickly send code to Circuit Playground Express!  # Makey Paper Craft ## Assemble ## Cut Shapes    Download and cut the parts out with scissors or use a cutting machine. The svg files are arranged in layers, so its easy to set up!   ![circuit_playground_paths.jpg](https://cdn-learn.adafruit.com/assets/assets/000/054/214/medium640/circuit_playground_paths.jpg?1526739174) [Download Makey SVG](https://cdn-learn.adafruit.com/assets/assets/000/054/215/original/makerfair_robot_waving.svg?1526744019) [Download Makey DFX](https://www.thingiverse.com/thing:2920325) ## Peel Parts    We used white card stock as the outline. Chip board or cardboard is used a the backing. This will give us a sturdy support structure to hold the micro servo. ![circuit_playground_peal-loop.gif](https://cdn-learn.adafruit.com/assets/assets/000/054/083/medium640thumb/circuit_playground_peal-loop.jpg?1526671200) ![](https://cdn-learn.adafruit.com/assets/assets/000/054/082/medium800thumb/circuit_playground_pieces-assemble.jpg?1526670949) ## Assemble layers    Lay the cardboard / chipboard on a flat surface. We used a stick of glue to adhere the white card stock over the chipboard and then adhered the red parts on top. Make sure to add enough glue to the corners to prevent them from lifting.  ## Prep Arm    We designed the waving arm as part of the body to limit the amount of small pieces we need to cut. So, we'll need to detach it off the body after the glue dries.   Use sharp scissors to cut along the shape of Makey's body.   ![circuit_playground_cut-arm.jpg](https://cdn-learn.adafruit.com/assets/assets/000/054/084/medium640/circuit_playground_cut-arm.jpg?1526671487) ![circuit_playground_cut-armB.jpg](https://cdn-learn.adafruit.com/assets/assets/000/054/085/medium640/circuit_playground_cut-armB.jpg?1526671507) ## Build paper standoffs Cut 10mm x 50mm strip of cardboard / chipboard. Use an accordian fold, simple zigzag folds, make the fold about 7-8mm in width. Next we'll need to and holes to our standoffs. Use the servos included M2 screws to carefully drill a hole on the folded chipboard.  ## Glue Standoffs    We used super glue to adhere our standoffs to the backside of Makey.    First align the arm and mark were the servo will pivot the arm for optimal wave action.   While we wait for the standoffs to dry, we'll continue with attaching the servo horn to the arm.  ![circuit_playground_standoff-glue.jpg](https://cdn-learn.adafruit.com/assets/assets/000/054/090/medium640/circuit_playground_standoff-glue.jpg?1526671678) ![circuit_playground_standoff-stack.jpg](https://cdn-learn.adafruit.com/assets/assets/000/054/091/medium640/circuit_playground_standoff-stack.jpg?1526671696) ## Arm Servo Horn  We can use the included screws to attach the servo horn. Mark the two mounting holes by pressing into the cardboard. Next, we'll cut another strip of chipboard / cardboard 10mm x 30mm long, accordion fold, and then super glue these stand off on the marked spot on the arm. Allow the glue to dry before mounting the servo horn. ## Body stand    To support Makey's body and servo, we'll need to build a stand to hold it up.    Cut a triangle piece that measures about 100mm x 70mm x 110mm long. Fold the 70mm portion to 10mm and then add drops of glue.   Attach the folded part of the support to the leg opposite of the servo standoff.  ![circuit_playground_cut-stand-tri.jpg](https://cdn-learn.adafruit.com/assets/assets/000/054/095/medium640/circuit_playground_cut-stand-tri.jpg?1526671980) ![circuit_playground_cut-stand-triB.jpg](https://cdn-learn.adafruit.com/assets/assets/000/054/096/medium640/circuit_playground_cut-stand-triB.jpg?1526672003) ![circuit_playground_cut-stand-tri-glue.jpg](https://cdn-learn.adafruit.com/assets/assets/000/054/097/medium640/circuit_playground_cut-stand-tri-glue.jpg?1526672024) ![circuit_playground_body-stand-and-tri.jpg](https://cdn-learn.adafruit.com/assets/assets/000/054/098/medium640/circuit_playground_body-stand-and-tri.jpg?1526672046) ## Mount Servo    Make sure the standoffs are dry before attaching the servo. We can use M2x8mm long screws to mount the servo.    Position the servo so the gear is pointing toward the front of Makey. Fasten the screw until the servo a tight against Makey's body.   Stand the Makey and test the body support can hold the up the body with the servo attached. If Makey flops over, add a slight slope to the bottom part of the triangle.   ![circuit_playground_servo-mount.jpg](https://cdn-learn.adafruit.com/assets/assets/000/054/099/medium640/circuit_playground_servo-mount.jpg?1526672637) ![circuit_playground_servo-mounted.jpg](https://cdn-learn.adafruit.com/assets/assets/000/054/100/medium640/circuit_playground_servo-mounted.jpg?1526672665) [Box Design Fusion360 source](https://a360.co/2LcdpBQ) [Box Design SVG](https://cdn-learn.adafruit.com/assets/assets/000/054/216/original/boxfold-cpx.svg?1526755658) [Download Box DFX](https://www.thingiverse.com/thing:2920325) ## Box assemble Cut out the box design and assemble the folds. The Circuit Playground Express mounts to the top of the box with four  M3 x 6mm Screws and M3 brass male-female standoffs. The battery sits inside the box with the wires routing through the port on the side.    ## Circuit Playground Express  We used alligator clips to connect the pins but soldering would be fine. You can rout the wires for the CircuitPlayground Express through the center of the mounting holes for the Circuit playground Express. ## Attach Arm    Attach the servo horn and test the close position. Adjust the horn to get the waving at the right position.    If the body move while waving, check the stand support and make adjustments to the fold. ![circuit_playground_horn-attach.jpg](https://cdn-learn.adafruit.com/assets/assets/000/054/105/medium640/circuit_playground_horn-attach.jpg?1526672835) ## That's it! ##   ## You can adjust the code to activate when any of the other sensors are triggered or even automate it! ![](https://cdn-learn.adafruit.com/assets/assets/000/054/107/medium800thumb/circuit_playground_hero-loop.jpg?1526672888) ## Featured Products ### Micro servo [Micro servo](https://www.adafruit.com/product/169) Tiny little servo can rotate approximately 180 degrees (90 in each direction) and works just like the standard kinds you're used to but _smaller_. You can use any servo code, hardware, or library to control these servos. Good for beginners who want to make stuff move without... Out of Stock [Buy Now](https://www.adafruit.com/product/169) [Related Guides to the Product](https://learn.adafruit.com/products/169/guides) ### Circuit Playground Express [Circuit Playground Express](https://www.adafruit.com/product/3333) **Circuit Playground Express** is the next step towards a perfect introduction to electronics and programming. We've taken the original Circuit Playground Classic and made it even better! Not only did we pack even more sensors in, we also made it even easier to... In Stock [Buy Now](https://www.adafruit.com/product/3333) [Related Guides to the Product](https://learn.adafruit.com/products/3333/guides) ### Small Alligator Clip to Male Jumper Wire Bundle - 12 Pieces [Small Alligator Clip to Male Jumper Wire Bundle - 12 Pieces](https://www.adafruit.com/product/3255) For bread-boarding with unusual non-header-friendly surfaces, these cables will be your best friends! No longer will you have long strands of alligator clips that are grabbing little wires. These compact jumper cables have a premium male header on one end, and a grippy mini alligator clip on... Out of Stock [Buy Now](https://www.adafruit.com/product/3255) [Related Guides to the Product](https://learn.adafruit.com/products/3255/guides) ### 3 x AAA Battery Holder with On/Off Switch and 2-Pin JST [3 x AAA Battery Holder with On/Off Switch and 2-Pin JST](https://www.adafruit.com/product/727) This battery holder connects 3 AAA batteries together in series for powering all kinds of projects. We spec'd these out because the box is slim, and 3 AAA's add up to about 3.3-4.5V, a very similar range to Lithium Ion/polymer (Li-Ion) batteries and have an on-off switch. That makes... In Stock [Buy Now](https://www.adafruit.com/product/727) [Related Guides to the Product](https://learn.adafruit.com/products/727/guides) ## Related Guides - [Adafruit Circuit Playground Express](https://learn.adafruit.com/adafruit-circuit-playground-express.md) - [CircuitPython Sin Complicaciones para la Circuit Playground Express y la Bluefruit](https://learn.adafruit.com/circuitpython-sin-complicaciones-para-la-circuit-playground-express.md) - [Chinese Dragon Puppet with Motion-Reactive Flame Effect](https://learn.adafruit.com/chinese-dragon-puppet-with-motion-reactive-flame-effect.md) - [Combo Dial Safe with Circuit Playground Express](https://learn.adafruit.com/combo-dial-safe-with-circuit-playground-express.md) - [BOSEbuild Reactive Sound ](https://learn.adafruit.com/bosebuild-reactive-sound.md) - [Xenomorph Halloween Candy Bucket](https://learn.adafruit.com/xenomorph-halloween-candy-bucket.md) - [Getting Started With Steven Universe](https://learn.adafruit.com/getting-started-with-steven-universe.md) - [Lucky Cat with Circuit Playground Express](https://learn.adafruit.com/lucky-cat-with-circuit-playground-express.md) - [LEGO Compatible Crickit Rover](https://learn.adafruit.com/lego-compatible-crickit-rover.md) - [Make it Move with Crickit](https://learn.adafruit.com/make-it-move-with-crickit.md) - [Buttermilk Boat with Circuit Playground Express](https://learn.adafruit.com/boat-with-circuit-playground-express.md) - [Using Piezo Buzzers with CircuitPython & Arduino](https://learn.adafruit.com/using-piezo-buzzers-with-circuitpython-arduino.md) - [Mini Pinball Table with Gemma M0](https://learn.adafruit.com/mini-pinball-table-with-gemma-m0.md) - [Dance-Reactive Tutu Sparkle Skirt](https://learn.adafruit.com/dance-reactive-tutu-sparkle-skirt.md) - [Circuit Playground D6 Dice](https://learn.adafruit.com/circuit-playground-d6-dice.md) - [Obsidian Sword – Steven Universe](https://learn.adafruit.com/obsidian-sword-steven-universe.md)