There are three wires we need to attach: red for power, black for ground, and yellow (or sometimes white) for data. 

  • Red goes from VOUT to +5V
  • Black goes from GND to GND
  • Yellow goes from A1 to DIN

You can plug a battery pack into the battery connector, or plug into the USB port to power your project. 

Note: A0 is connected to the speaker, so we suggest using the other pads that are free, like A1.

This guide was first published on Apr 08, 2020. It was last updated on Mar 25, 2020.

This page (Quick Start) was last updated on Mar 31, 2020.

Text editor powered by tinymce.