Featured Products

SEGGER J-Link EDU - JTAG/SWD Debugger

PRODUCT ID: 1369
The SEGGER J-Link EDU is identical to the more expensive J-Link BASE model except for the terms of use.If...
$69.95
IN STOCK

JTAG (2x10 2.54mm) to SWD (2x5 1.27mm) Cable Adapter Board

PRODUCT ID: 2094
This adapter board is designed for adapting a 'classic' 2x10 (0.1"/2.54mm pitch) JTAG cable to a slimmer 2x5 (0.05"/1.27mm pitch) SWD Cable.  It's helpful...
$4.95
IN STOCK

10-pin 2x5 Socket-Socket 1.27mm IDC (SWD) Cable - 150mm long

PRODUCT ID: 1675
These little cables are handy when programming or debugging a tiny board that uses 10-pin 1.27mm (0.05") pitch SWD programming connectors. We see these connectors often on ARM...
OUT OF STOCK

SWD (2x5 1.27mm) Cable Breakout Board

PRODUCT ID: 2743
This adapter board is designed to make it easier to use ARM dev boards that use slimmer 2x5 (0.05"/1.27mm pitch) SWD cables for programming.  It's helpful for using...
$1.95
IN STOCK

Adafruit Feather M0 Basic Proto - ATSAMD21 Cortex M0

PRODUCT ID: 2772
Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller...
$19.95
IN STOCK

Adafruit Feather M0 Adalogger

PRODUCT ID: 2796
Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller...
$19.95
IN STOCK

Adafruit Feather M0 Bluefruit LE

PRODUCT ID: 2995
Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller...
$29.95
IN STOCK

Adafruit Feather M0 WiFi - ATSAMD21 + ATWINC1500

PRODUCT ID: 3010
Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller...
$34.95
IN STOCK

JST PH 2-Pin Cable - Female Connector 100mm

PRODUCT ID: 261
Red and black tinned wires with a 2-pin JST PH connector on the end. 4" / 100mm long. Matches up nicely with our Lipoly chargers!
OUT OF STOCK

JST-PH 2-Pin SMT Right Angle Connector

PRODUCT ID: 1769
A simple 2-pin connector that is compatible with the "JST PH 2-pin" connector - perfect for soldering to the bottom of our 3.3V...
$0.75
IN STOCK

Carbide PCB Drill Bit - 0.9mm

PRODUCT ID: 2120
If you've started designing your own PCBs in Eagle or KiCad and want to make...
$1.95
IN STOCK

Short Feather Male Headers - 12-pin and 16-pin Male Header Set

PRODUCT ID: 3002
These two Short Male Headers alone are, well, lonely. But pair them with any of our 
$0.50
IN STOCK