The above schematic is for the Feather M0 with JTAG connections. It includes two connectors. The top right is the SWD (2x5) shrouded JTAG connector. The bottom right connector is Adafruit's JST-PH-2-Pin SMT Right Angle Connector used to connect the a JST cable to the SWDIO and SWCLK (circular not square) pads on the bottom side of the Feather M0 boards. Download the schematic file here.

Featherwing board layout in Eagle format.  You can also access the gerber files here if you are not an Eagle user.

This guide was first published on Jan 30, 2017. It was last updated on Jan 30, 2017.

This page (Board Design) was last updated on Jan 14, 2017.

Text editor powered by tinymce.