This guide will show you how to display our Adafruit Tarot Cards as a looping slideshow after you've setup your MagTag.

Want a cherry on top? With our new Fortune Teller feature on the Adafruit AR app, you can scan your Adafruit Tarot Cards on the MagTag, and Minerva will read your card in Augmented reality!

What you'll need:

Adafruit MagTag - 2.9" Grayscale E-Ink WiFi Display

• An iPhone or  iPad running iOS 13 or greater.

• Adafruit AR

Mu-Editor

Please note - the Adafruit AR app is currently only available for iOS.

Parts

MagTag dev board with enclosure pieces, four magnet feet, and lipoly battery
The Adafruit MagTag combines the new ESP32-S2 wireless module and a 2.9" grayscale E-Ink display to make a low-power IoT display that can show data on its screen...
Out of Stock
Angled shot of Adafruit MagTag development board with ESP32-S2 and E-Ink display.
The Adafruit MagTag combines the new ESP32-S2 wireless module and a 2.9" grayscale E-Ink display to make a low-power IoT display that can show data on its screen even when power...
Out of Stock
Angled shot of four magnet feet.
Got a glorious RGB Matrix project you want to mount and display in your workspace or home? If you have one of the matrix panels listed below, you'll need a pack of these...
$2.50
In Stock
Lithium Ion Polymer Battery 3.7v 420mAh with JST 2-PH connector and short cable
Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This...
$6.95
In Stock
USB Type A to Type C Cable - 1ft - 0.3 meter
As technology changes and adapts, so does Adafruit. This  USB Type A to Type C cable will help you with the transition to USB C, even if you're still...
$3.95
In Stock

This project builds off of John Park's Magtag Slideshow guide. The steps on the following pages will show you how to set it up, then add the tarot cards.

This guide was first published on Dec 22, 2020. It was last updated on Dec 22, 2020.

This page (Overview) was last updated on Dec 17, 2020.

Text editor powered by tinymce.