This project will show you how to fetch information from the internet and show it on your MagTag with progress bars for percentage data.

We'll look at the very basics of the displayio ProgressBar and then see how it can be used to easily show dynamic data.

Parts

Angled shot of Adafruit MagTag development board with ESP32-S2 and E-Ink display.
The Adafruit MagTag combines the new ESP32-S2 wireless module and a 2.9" grayscale E-Ink display to make a low-power IoT display that can show data on its screen even when power...
Out of Stock
MagTag dev board with enclosure pieces, four magnet feet, and lipoly battery
The Adafruit MagTag combines the new ESP32-S2 wireless module and a 2.9" grayscale E-Ink display to make a low-power IoT display that can show data on its screen...
Out of Stock
Angled shot of four magnet feet.
Got a glorious RGB Matrix project you want to mount and display in your workspace or home? If you have one of the matrix panels listed below, you'll need a pack of these...
Out of Stock
USB Type A to Type C Cable - 1ft - 0.3 meter
As technology changes and adapts, so does Adafruit. This  USB Type A to Type C cable will help you with the transition to USB C, even if you're still...
$3.95
In Stock
Lithium Ion Polymer Battery 3.7v 1200mAh with JST 2-PH connector
Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This...
Out of Stock

This guide was first published on Dec 02, 2020. It was last updated on Mar 19, 2024.

This page (Overview) was last updated on Mar 08, 2024.

Text editor powered by tinymce.