Project Specific Software Setup

Save Subscribe

Bitmaps

This project uses the following BMP image files. Make sure you have a copy of them to the CIRCUITPY drive which appears when you connect your MagTag to your computer via a known good USB cable. You can download them here or via the project zip link in the code sections.

Libraries

Since we end up only using a few of the MagTag's features, this project does not use the MagTag specific library. Therefore, you only need the following in your CIRCUITPY/lib folder:

circuitpython_Screenshot_from_2021-01-12_12-45-19.png
 Install CircuitPython Pin Alarm Basics 

This guide was first published on Jan 12, 2021. It was last updated on Jan 12, 2021.

This page (Project Specific Software Setup) was last updated on Jan 12, 2021.

Text editor powered by tinymce.