IoT Holiday Countdown

In this project, make a Christmas countdown using Adafruit’s MagTag. This grabs the date from the internet and updates each day so you know how many days until Christmas. The little bobbles on the tree are filled in as the days go by so you can quickly see how many days are left.

3D Printed Stand

The stand is designed to be festive and comes in two version: Portrait and Landscape.

You may use two M3 screws to secure the MagTag to the stand, it's easy peasy! 


Angled shot of Adafruit MagTag development board with ESP32-S2 and E-Ink display.
The Adafruit MagTag combines the new ESP32-S2 wireless module and a 2.9" grayscale E-Ink display to make a low-power IoT display that can show data on its screen even when power...
Out of Stock
USB Type A to Type C Cable - approx 1 meter / 3 ft long
As technology changes and adapts, so does Adafruit. This  USB Type A to Type C cable will help you with the transition to USB C, even if you're still...
In Stock

This guide was first published on Dec 09, 2020. It was last updated on Jul 22, 2024.

This page (Overview) was last updated on Mar 08, 2024.

Text editor powered by tinymce.