The Covid Tracking Project (https://covidtracking.com) tracks all US state data and collates it into one report. This project for MagTag wakes up once a day at 8pm, about a half hour after the data is posted daily, and displays the latest data report.
In between check-ins the MagTag goes into a deep sleep mode so it will run for many weeks on a charge
Parts Required
You'll want a MagTag + battery, and magnetic feet to attach it to your fridge or other metallic surface
The Adafruit MagTag combines the new ESP32-S2 wireless module and a 2.9" grayscale E-Ink display to make a low-power IoT display that can show data on its screen...
Out of Stock
You can also get the parts separately
The Adafruit MagTag combines the new ESP32-S2 wireless module and a 2.9" grayscale E-Ink display to make a low-power IoT display that can show data on its screen even when power...
Out of Stock
Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This...
$6.95
In Stock
Got a glorious RGB Matrix project you want to mount and display in your workspace or home? If you have one of the matrix panels listed below, you'll need a pack of these...
$2.50
In Stock
Also needed:
- WiFi network (802.11 b/g/n)
- A desktop or laptop computer is required for initial setup: any text editor will suffice
- An Adafruit IO account. If you’ve previously purchased from Adafruit and created an account, this is automagic (and free)!
