3D Printed Parts

The main assembly is available in Fusion 360 and STEP file formats. This includes all of the 3D printed parts and electronic components used in the project. Use the main assembly to create any edits, updates, or modifications. 

Make multiple copies of the following parts.

• 4x MagTag Button

Slice Settings

The 3D printed parts feature tight tolerances and have been tested using PLA filament using a Bambu Lab X1C FDM 3D printer. Standard quality settings were used and be can referenced for your print.

• 0.2mm layer height
• 0.42 line width
• 210C nozzle / 55C bed
• 2 wall loops
• 5 top/bottom shell layers

Build Volume

The parts require a 3D printer with a minimum build volume of:

• 90mm (X) x 65mm (Y) x 16mm (Z)