# MagTag Case
## Overview
3D Print your own snap fit enclosure for the MagTag. This features a built-in kickstand that positions your MagTag at the perfect viewing angle.
The case accommodates all of the various ports and components such as the two 3-pin JST connectors, STEMMA QT port, light sensor, reset button, boot 0 button, and USB-C port.
The on/off switch is an additional piece that is bigger in size, making it easier to use. The four front facing buttons also have extra parts that feel great to press and more ergonomic.
The case has enough space to accommodate a 500mAh LiPoly battery for making the MagTag portable. Projects that feature deep sleep may allow the device to run for several days!
## Parts
### Adafruit MagTag - 2.9" Grayscale E-Ink WiFi Display
[Adafruit MagTag - 2.9" Grayscale E-Ink WiFi Display](https://www.adafruit.com/product/4800)
The Adafruit MagTag combines the ESP32-S2 wireless module and a 2.9" grayscale E-Ink display to make a low-power IoT display that can show data on its screen even when power is removed! The ESP32-S2 is great because it builds on the years of code and support for the ESP32 and also adds...
Out of Stock
[Buy Now](https://www.adafruit.com/product/4800)
[Related Guides to the Product](https://learn.adafruit.com/products/4800/guides)
### Black Nylon Machine Screw and Stand-off Set – M3 Thread
[Black Nylon Machine Screw and Stand-off Set – M3 Thread](https://www.adafruit.com/product/4685)
Totaling **420 pieces** , this **M3 Screw Set** is a must-have for your workstation. You'll have enough screws, nuts, and hex standoffs to fuel your maker tendencies for days on end! M3 size screws fit a number of Adafruit breakout/dev board...
In Stock
[Buy Now](https://www.adafruit.com/product/4685)
[Related Guides to the Product](https://learn.adafruit.com/products/4685/guides)
# Optional Parts
### Mini Magnet Feet for RGB LED Matrices (Pack of 4)
[Mini Magnet Feet for RGB LED Matrices (Pack of 4)](https://www.adafruit.com/product/4631)
Got a glorious RGB Matrix project you want to mount and display in your workspace or home? If you have one of the matrix panels listed below, you'll need a pack of these **Mini-Magnet Feet.** We got these specifically for our RGB LED Matrices, which no longer...
In Stock
[Buy Now](https://www.adafruit.com/product/4631)
[Related Guides to the Product](https://learn.adafruit.com/products/4631/guides)
### Lithium Ion Polymer Battery - 3.7v 500mAh
[Lithium Ion Polymer Battery - 3.7v 500mAh](https://www.adafruit.com/product/1578)
Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 500mAh for a total of about 1.9 Wh. If you need a larger (or smaller!) battery,
In Stock
[Buy Now](https://www.adafruit.com/product/1578)
[Related Guides to the Product](https://learn.adafruit.com/products/1578/guides)
# MagTag Case
## CAD Files
## 3D Printed Parts
The main assembly is available in Fusion 360 and STEP file formats. This includes all of the 3D printed parts and electronic components used in the project. Use the main assembly to create any edits, updates, or modifications.
Make multiple copies of the following parts.
- 4x MagTag Button
[Download Magtag_STLs.zip](https://cdn-learn.adafruit.com/assets/assets/000/140/230/original/Magtag_STLs.zip?1759763452)
[Download CAD Source Files](https://cdn-learn.adafruit.com/assets/assets/000/140/231/original/CAD.zip?1759763738)
## Slice Settings
The 3D printed parts feature tight tolerances and have been tested using PLA filament using a **Bambu Lab X1C** FDM 3D printer. Standard quality settings were used and be can referenced for your print.
- 0.2mm layer height
- 0.42 line width
- 210C nozzle / 55C bed
- 2 wall loops
- 5 top/bottom shell layers
## Build Volume
The parts require a 3D printer with a minimum build volume of:
- 90mm (X) x 65mm (Y) x 16mm (Z)
# MagTag Case
## Assembly
## Install Buttons
Hold the top half of the enclosure face side down and place the four buttons into the holes. Then set it aside.
## Install Battery (Optional)
Connect the optional 500mAh lipo battery to the MagTag. Use a piece of double-sided tap or mounting tack to keep the battery adhered to the MagTag's PCB.
## Install MagTag
Get the bottom half of the enclosure and four M3 x 6mm long nylon screws.
Orient the MagTag with the bottom half of the enclosure. Place the MagTag into the bottom with the mounting holes lined up.
## Secure MagTag
Flip the MagTag and bottom part and fasten the M3 screws into the four mounting holes.
## Install Switch
Place the switch into the slot near the MagTag's on/off switch. The actuator of the on/off switch should fit in between the two nubs.
## Join Top and Bottom
Orient the top and bottom half of the enclosure parts so they orient. While holding the switch in place, begin joining the two halves together making sure the four buttons stay in place.
Firmly join the two halves together until they snap fit closed.
## Kickstand
To use the kickstand, locate the notch on the back side. To pop out the stand, fit your fingernail under the ridge of the stand and pull it out.
The stand can be stowed away by snaping it into the back side of the enclosure.
## Assembled Case
The assembled case is ready to prop on your desk, or stick to your refrigerator or other metal surface using the magnetic feet.
## Featured Products
### Adafruit MagTag Enclosure & Buttons Kit
[Adafruit MagTag Enclosure & Buttons Kit](https://www.adafruit.com/product/6433)
Here is a cool and minimal enclosure for your [MagTag](https://www.adafruit.com/product/4800) to keep it safe during use and transport. This case has been custom-designed and 3D printed to accommodate all connection ports of the MagTag. No screws or...
In Stock
[Buy Now](https://www.adafruit.com/product/6433)
[Related Guides to the Product](https://learn.adafruit.com/products/6433/guides)
### Adafruit MagTag - 2.9" Grayscale E-Ink WiFi Display
[Adafruit MagTag - 2.9" Grayscale E-Ink WiFi Display](https://www.adafruit.com/product/4800)
The Adafruit MagTag combines the ESP32-S2 wireless module and a 2.9" grayscale E-Ink display to make a low-power IoT display that can show data on its screen even when power is removed! The ESP32-S2 is great because it builds on the years of code and support for the ESP32 and also adds...
Out of Stock
[Buy Now](https://www.adafruit.com/product/4800)
[Related Guides to the Product](https://learn.adafruit.com/products/4800/guides)
### Mini Magnet Feet for RGB LED Matrices (Pack of 4)
[Mini Magnet Feet for RGB LED Matrices (Pack of 4)](https://www.adafruit.com/product/4631)
Got a glorious RGB Matrix project you want to mount and display in your workspace or home? If you have one of the matrix panels listed below, you'll need a pack of these **Mini-Magnet Feet.** We got these specifically for our RGB LED Matrices, which no longer...
In Stock
[Buy Now](https://www.adafruit.com/product/4631)
[Related Guides to the Product](https://learn.adafruit.com/products/4631/guides)
### Lithium Ion Polymer Battery - 3.7v 500mAh
[Lithium Ion Polymer Battery - 3.7v 500mAh](https://www.adafruit.com/product/1578)
Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 500mAh for a total of about 1.9 Wh. If you need a larger (or smaller!) battery,
In Stock
[Buy Now](https://www.adafruit.com/product/1578)
[Related Guides to the Product](https://learn.adafruit.com/products/1578/guides)
### Black Nylon Machine Screw and Stand-off Set – M3 Thread
[Black Nylon Machine Screw and Stand-off Set – M3 Thread](https://www.adafruit.com/product/4685)
Totaling **420 pieces** , this **M3 Screw Set** is a must-have for your workstation. You'll have enough screws, nuts, and hex standoffs to fuel your maker tendencies for days on end! M3 size screws fit a number of Adafruit breakout/dev board...
In Stock
[Buy Now](https://www.adafruit.com/product/4685)
[Related Guides to the Product](https://learn.adafruit.com/products/4685/guides)
## Related Guides
- [Adafruit MagTag](https://learn.adafruit.com/adafruit-magtag.md)
- [CircuitPython Web Workflow Code Editor Quick Start](https://learn.adafruit.com/getting-started-with-web-workflow-using-the-code-editor.md)
- [Microsoft Azure Cost Monitor](https://learn.adafruit.com/azure-cost-monitor.md)
- [ePaper Camera](https://learn.adafruit.com/epaper-camera.md)
- [AdaBox 017](https://learn.adafruit.com/adabox017.md)
- [OSHWA Project Display With Adafruit MagTag](https://learn.adafruit.com/oshwa-project-display-with-adafruit-magtag.md)
- [MagTag IoT Menorah](https://learn.adafruit.com/magtag-iot-menorah.md)
- [MagTag Dishwasher Status](https://learn.adafruit.com/magtag-dishwasher-status.md)
- [Clue And MagTag Pep Talk Generator](https://learn.adafruit.com/clue-and-magtag-pep-talk-generator.md)
- [MagTag Sports Schedule Viewer](https://learn.adafruit.com/magtag-sports-schedule-viewer.md)
- [MagTag Tides Viewer](https://learn.adafruit.com/magtag-tides-viewer.md)
- [50 Cent CPI Tracker for MagTag](https://learn.adafruit.com/50-cent-cpi-tracker-for-magtag.md)
- [Adafruit MagTag COVID Vaccination Percent Tracker](https://learn.adafruit.com/adafruit-magtag-covid-vaccination-percent-tracker.md)
- [Haiku Viewer for MagTag](https://learn.adafruit.com/haiku-viewer-for-magtag.md)
- [MagTag 3D Printed Stand Case](https://learn.adafruit.com/magtag-3d-printed-stand-case.md)
- [Cheerlights Holiday Wreath with Animations](https://learn.adafruit.com/cheerlights-led-animations.md)