# MagTag 3D Printed Stand Case
## Overview
## Snap Fit Case
This case is designed to protect the Adafruit MagTag. It features cutouts for the four user buttons, USB-C, and on/off switch. The reset and DFU side buttons feature reliefs that allow the overlays to actuate the switches.
You may also use vinyl to create covers with beautifully glossy holographic decals.
## Vinyl & Acrylic Upgrade
Have access to a CNC mill, vinyl or laser cutter? Use our SVG files to create custom decals, back and front faceplates.
## Desktop Stand
Want to prop up the MagTag on your desk? This simple 3D printed stand mounts the MagTag at a 70 degree angle for perfect viewing. The wide bottom prevents the stand from tipping over. An hole in the lower center allows a STEMMA cable to pass through for connecting other I2C sensors.
## Parts
### Adafruit MagTag - 2.9" Grayscale E-Ink WiFi Display
[Adafruit MagTag - 2.9" Grayscale E-Ink WiFi Display](https://www.adafruit.com/product/4800)
The Adafruit MagTag combines the ESP32-S2 wireless module and a 2.9" grayscale E-Ink display to make a low-power IoT display that can show data on its screen even when power is removed! The ESP32-S2 is great because it builds on the years of code and support for the ESP32 and also adds...
Out of Stock
[Buy Now](https://www.adafruit.com/product/4800)
[Related Guides to the Product](https://learn.adafruit.com/products/4800/guides)
### Mini Magnet Feet for RGB LED Matrices (Pack of 4)
[Mini Magnet Feet for RGB LED Matrices (Pack of 4)](https://www.adafruit.com/product/4631)
Got a glorious RGB Matrix project you want to mount and display in your workspace or home? If you have one of the matrix panels listed below, you'll need a pack of these **Mini-Magnet Feet.** We got these specifically for our RGB LED Matrices, which no longer...
In Stock
[Buy Now](https://www.adafruit.com/product/4631)
[Related Guides to the Product](https://learn.adafruit.com/products/4631/guides)
### Lithium Ion Polymer Battery with Short Cable - 3.7V 420mAh
[Lithium Ion Polymer Battery with Short Cable - 3.7V 420mAh](https://www.adafruit.com/product/4236)
Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 420mAh for a total of about 1.55 Wh. If you need a larger (or smaller!) battery,
In Stock
[Buy Now](https://www.adafruit.com/product/4236)
[Related Guides to the Product](https://learn.adafruit.com/products/4236/guides)
### USB Type A to Type C Cable - approx 1 meter / 3 ft long
[USB Type A to Type C Cable - approx 1 meter / 3 ft long](https://www.adafruit.com/product/4474)
As technology changes and adapts, so does Adafruit. This **USB Type A to Type C** cable will help you with the transition to USB C, even if you're still totin' around a USB Type A hub, computer or laptop.
USB C is the latest industry-standard connector for...
In Stock
[Buy Now](https://www.adafruit.com/product/4474)
[Related Guides to the Product](https://learn.adafruit.com/products/4474/guides)
# MagTag 3D Printed Stand Case
## 3D Printing
## Parts List
STL files for 3D printing are oriented to print "as-is" on FDM style machines. Parts are designed to 3D print without any support material. Original design source may be downloaded using the links below.
**Case File names**
- magtag-front-cover.stl
- magtag-back-cover.stl
- magtag-frame.stl
**Stand File names**
- magtag-stand.stl
**SVG File names**
- magtag-backcover.svg
- magtag-frontcover.svg
- magtag-viny-decal.svg
[Download CAD source files](https://cdn-learn.adafruit.com/assets/assets/000/097/148/original/cad.zip?1605730157)
[Download STL files](https://cdn-learn.adafruit.com/assets/assets/000/097/149/original/STLs.zip?1605730189)
[Download SVG files](https://cdn-learn.adafruit.com/assets/assets/000/097/151/original/SVGs.zip?1605730682)
## Slicing Parts
No supports are required. Slice with setting for PLA material.
The parts were sliced using CURA using the slice settings below.
- PLA filament 220c extruder
- 0.2 layer height
- 10% gyroid infill
- 60mm/s print speed
- 60c heated bed
## Design Source Files
The project assembly was designed in Fusion 360. This can be downloaded in different formats like STEP, STL and more. Electronic components like Adafruit's board, displays, connectors and more can be downloaded from the [Adafruit CAD parts GitHub Repo](https://github.com/adafruit/Adafruit_CAD_Parts).
# MagTag 3D Printed Stand Case
## Assembly
## Case Assembly
## Install Front Cover
Line up the four user buttons with the cutouts on the front cover. Place the PCB into the front cover and press so the pegs are fitted into the standoffs on the MagTag. Reference the photo for correct placement.
Install the battery and use double-sided scotch tape to stick the battery to the back of the MagTag. Right behind the silk screen graphics of the refrigerator is a good spot.
## Install Frame
Orient the frame with the cover by lining up the side buttons with the opening on the frame. Insert the frame into the front cover and fit the edges into the snaps on the front cover. Press to snap fit together.
## Secure Back Cover
Use 4x M3 thumb screws with magnets to secure the back cover to the frame. Place the back cover over the frame and line up the mounting holes. Insert and fasten the four screws.
## Final Case Build
And there you have it! The case is ready to use. You can adorn the front cover with vinyl.
## Stand Assembly
## Screws for Stand
Use 4x M3 thumb screws with magnets to secure the MagTag PCB to the 3D printed stand. Place the MagTag over the stand and line up the mounting holes with the standoffs. Insert and fasten the M3 screws to secure the MagTag PCB to the stand.
## Installed Battery (Optional)
You can use the 420mAh Lipo battery with the stand but it's not necessary. Use a USB-C type cable to power the MagTag or use the Lipo battery.
## Final Stand Build
And there you have it! The MagTag is setup on a stand and ready for use.
## Featured Products
### Adafruit MagTag - 2.9" Grayscale E-Ink WiFi Display
[Adafruit MagTag - 2.9" Grayscale E-Ink WiFi Display](https://www.adafruit.com/product/4800)
The Adafruit MagTag combines the ESP32-S2 wireless module and a 2.9" grayscale E-Ink display to make a low-power IoT display that can show data on its screen even when power is removed! The ESP32-S2 is great because it builds on the years of code and support for the ESP32 and also adds...
Out of Stock
[Buy Now](https://www.adafruit.com/product/4800)
[Related Guides to the Product](https://learn.adafruit.com/products/4800/guides)
### Mini Magnet Feet for RGB LED Matrices (Pack of 4)
[Mini Magnet Feet for RGB LED Matrices (Pack of 4)](https://www.adafruit.com/product/4631)
Got a glorious RGB Matrix project you want to mount and display in your workspace or home? If you have one of the matrix panels listed below, you'll need a pack of these **Mini-Magnet Feet.** We got these specifically for our RGB LED Matrices, which no longer...
In Stock
[Buy Now](https://www.adafruit.com/product/4631)
[Related Guides to the Product](https://learn.adafruit.com/products/4631/guides)
### Lithium Ion Polymer Battery with Short Cable - 3.7V 420mAh
[Lithium Ion Polymer Battery with Short Cable - 3.7V 420mAh](https://www.adafruit.com/product/4236)
Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 420mAh for a total of about 1.55 Wh. If you need a larger (or smaller!) battery,
In Stock
[Buy Now](https://www.adafruit.com/product/4236)
[Related Guides to the Product](https://learn.adafruit.com/products/4236/guides)
### USB Type A to Type C Cable - approx 1 meter / 3 ft long
[USB Type A to Type C Cable - approx 1 meter / 3 ft long](https://www.adafruit.com/product/4474)
As technology changes and adapts, so does Adafruit. This **USB Type A to Type C** cable will help you with the transition to USB C, even if you're still totin' around a USB Type A hub, computer or laptop.
USB C is the latest industry-standard connector for...
In Stock
[Buy Now](https://www.adafruit.com/product/4474)
[Related Guides to the Product](https://learn.adafruit.com/products/4474/guides)
## Related Guides
- [Adafruit MagTag](https://learn.adafruit.com/adafruit-magtag.md)
- [MagTag Sports Schedule Viewer](https://learn.adafruit.com/magtag-sports-schedule-viewer.md)
- [CircuitPython Display_Text Library](https://learn.adafruit.com/circuitpython-display-text-library.md)
- [MagTag Lists From Google Spreadsheets](https://learn.adafruit.com/collaborative-spreadsheets-to-magtag.md)
- [AdaBox 017](https://learn.adafruit.com/adabox017.md)
- [eInk Literature Quotes Clock for MagTag](https://learn.adafruit.com/eink-literary-quotes-clock-for-magtag.md)
- [MagTag Dishwasher Status](https://learn.adafruit.com/magtag-dishwasher-status.md)
- [What’s Fresh Today? In-Season Produce Reminder for Adafruit MagTag](https://learn.adafruit.com/seasonal-produce-for-adafruit-magtag.md)
- [No-Code MagTag Every Day Goal Tracker](https://learn.adafruit.com/no-code-magtag-every-day-goal-tracker.md)
- [MagTag James Webb Telescope Status](https://learn.adafruit.com/magtag-james-webb-telescope-status.md)
- [Haiku Viewer for MagTag](https://learn.adafruit.com/haiku-viewer-for-magtag.md)
- [Clue And MagTag Pep Talk Generator](https://learn.adafruit.com/clue-and-magtag-pep-talk-generator.md)
- [MagTag Daily Weather Forecast Display](https://learn.adafruit.com/magtag-weather.md)
- [Adafruit MagTag COVID Vaccination Percent Tracker](https://learn.adafruit.com/adafruit-magtag-covid-vaccination-percent-tracker.md)
- [Deep Sleep with CircuitPython](https://learn.adafruit.com/deep-sleep-with-circuitpython.md)