It's good to become familiar with the motion sensor, so first set up a breadboard according to the instructions here. You can use either a 3 or 4 battery set-up, so don't panic when you see two battery cases. Have fun waving your hand around. Make sure you try moving the bracket as suggested in the "Triggering" section, so you understand how the sensor works.
Test the Sensor
This guide was first published on Dec 18, 2014. It was last updated on Dec 18, 2014.
This page (Test the Sensor) was last updated on Feb 12, 2021.
Text editor powered by tinymce.