CAD Parts List
STL files for 3D printing are oriented to print "as-is" on FDM style machines. Parts are designed to 3D print without any support material. Original design source may be downloaded using the links below:
- Back Cover.stl
- Base Bottom Cover.stl
- Base Frame.stl
- Base Top Cover.stl
- Case.stl
- Face Diffuser.stl
- Face Mickey Outline.stl
- Face Mickey.stl
- Face Outer Ring.stl
- NeoRing.stl
- PCB mount.stl
- Pole.stl
- RFID-standoff.stl
CAD Assembly
The Feather, amplifier and Wiz Kit board are secured to the PCB mount. The PCB mount is secured to the base bottom cover. The base bottom cover snap fits onto the base frame.
The base frame snap fits into the base top cover. The base top cover is secured to the pole. The pole is secured to the case. The NeoPixel strip is press fitted into the NeoRing holder.
The NeoRing holder is press fitted into the case. The RFID module is secured to 3D printed standoffs. The 3D printed standoffs are secured to the back cover. The back cover is press fitted onto the case.
The face diffuser is press fitted into the case. The mickey face out and out ring are press fitted into the face diffuser. The speaker is attached to the face diffuser with the adhesive.
Build Volume
The parts require a 3D printer with a minimum build volume.
- 114mm (X) x 114mm (Y) x 50mm (Z)
Faceplate Diffuser
The Face Diffuser.stl part should be printed in translucent filament. This will allow the NeoPixel LEDs to shine through and illuminate the features.
Design Source Files
The project assembly was designed in Fusion 360. This can be downloaded in different formats like STEP, STL and more. Electronic components like Adafruit's boards, displays, connectors and more can be downloaded from the Adafruit CAD parts GitHub Repo.
Text editor powered by tinymce.
