Featured Products

Adafruit Feather 32u4 Basic Proto

PRODUCT ID: 2771
Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable...
$19.95
IN STOCK

Adafruit Feather M0 Basic Proto - ATSAMD21 Cortex M0

PRODUCT ID: 2772
Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller...
$19.95
IN STOCK

Assembled Terminal Block Breakout FeatherWing for all Feathers

PRODUCT ID: 2926
The Terminal Block Breakout FeatherWing kit is like the Golden Eagle of prototyping FeatherWings (eg. majestic, powerful, good-looking). To start, you get a nice prototyping area...
$14.95
IN STOCK

UV/UVA 400nm Purple LED 5mm Clear Lens - 10 pack

PRODUCT ID: 1793
Need some really bright LEDs? We are big fans of these 5mm clear UV / Purple LEDs. These emit UV 'blacklight' in the UVA spectrum so they are great for...
$4.95
IN STOCK

5V 1A (1000mA) USB port power supply - UL Listed

PRODUCT ID: 501
Need a USB jack for charging or powering a project, but don't want to lug around a computer? This switching supply gives a clean regulated output at up to 1000mA! 110 or 240 input,...
$5.95
IN STOCK

Stranded-Core Wire Spool - 25ft - 22AWG - Black

PRODUCT ID: 2976
This wire is flexible, strong, and super easy to solder, too! Stranded core wire is best used for wiring jigs where theres bending or movement expected. Works well with...
$2.95
IN STOCK

Premium Female/Male 'Extension' Jumper Wires - 40 x 12" (300mm)

PRODUCT ID: 824
Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 12" (300mm) long and come in a 'strip' of 40 (4 pieces of each of ten rainbow...
$7.95
IN STOCK

Premium Female/Female Raw Custom Jumper Wires - 40 x 6" (150mm)

PRODUCT ID: 3141
Our Raw F/F Jumper Wires are perfect for making custom jumper wire sets for wire harnesses or jumpering between headers on PCB's. These premium jumpers are a little over 6"...
$2.95
IN STOCK

Small Single Row Wire Housing Pack for DIY Jumper Cables

PRODUCT ID: 3145
Are you frustrated by the lack of customization options for your jumper wires? Look no further!Compatible...
$1.95
IN STOCK

Hakko Professional Quality 20-30 AWG Wire Strippers

PRODUCT ID: 527
These are the finest wire strippers we have used, and if you have to do a lot of wiring, you will agree! They have soft rounded grips - very comfortable to use, and precision ground...
$14.95
IN STOCK

Heat Shrink Pack

PRODUCT ID: 344
Heat shrink is the duct tape of electronics, it keeps your stuff all safe and kept together. Especially when wiring and soldering, use heat shrink to add mechanical strength to cables....
OUT OF STOCK

Multi-Colored Heat Shrink Pack - 3/32" + 1/8" + 3/16" Diameters

PRODUCT ID: 1649
Heat shrink is the duct tape of electronics which I guess makes this heat shrink the colorful and exciting duct tape they sell at craft stores.  This heat shrink comes in six...
$4.95
IN STOCK

Solder Wire - 60/40 Rosin Core - 0.5mm/0.02" diameter - 50 grams

PRODUCT ID: 1886
If you want to make a kit you'll need some solder. This 0.1 lb (about 50 grams) spool is a good amount, not too much (like 1 lb spools) and not too little (like those little 'pocket clip'...
OUT OF STOCK