3D Printing

Save Subscribe

Parts List

 

STL files for 3D printing are oriented to print "as-is" on FDM style machines. Parts are designed to 3D print without any support material. Original design source may be downloaded using the links below.

Slicing Parts

Supports are required for the full keycaps. Slice with setting for PLA material. 

The parts were sliced using CURA using the slice settings below.

  • PLA filament 220c extruder
  • 0.2 layer height
  • 10% gyroid infill
  • 60mm/s print speed
  • 60c heated bed

Supports

  • Support Extrusion Width: .2
  • Support Density: 4%
  • Support Z Height: .21
  • Interface: Off
  • Support Roof: On
  • Support Pattern: Zig Zag
  • Support Roof Pattern: Zig Zag

Assembly

 

The keycaps are compatible with Cherry MX and Kailh Box switches.

You can print the keycaps in one piece or just the top cover for existing keycaps.

The keycaps are installed by press fitting them over the stem of the mechanical key switch.



 Code

This guide was first published on Jul 21, 2021. It was last updated on Jul 21, 2021.

This page (3D Printing) was last updated on Jul 19, 2021.

Text editor powered by tinymce.