A Black woman's manicured hand holds a round microcontroller with lit up LEDs.
Circuit Playground Express is the next step towards a perfect introduction to electronics and programming. We've taken the original Circuit Playground Classic and...
guides with product
$24.95
In Stock
 Bundle of Small Alligator Clip to Male Jumper Wires
For bread-boarding with unusual non-header-friendly surfaces, these cables will be your best friends! No longer will you have long strands of alligator clips that are grabbing little...
guides with product
Out of Stock
USB cable - USB A to Micro-B - 3 foot long
This here is your standard A to micro-B USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Metro, Feather, Raspberry Pi or other dev-board or...
$2.95
In Stock
Micro servo with three pin cable
Tiny little servo can rotate approximately 180 degrees (90 in each direction) and works just like the standard kinds you're used to but smaller. You can use any servo...
Out of Stock
Dramatically lit Adafruit PCB Ruler
The first time you soldered up a surface mount component you may have been surprised "these are really small parts!" and there's dozens of different names too!...
guides with product
$4.95
In Stock
Front shot of CR2032 Lithium Coin Cell Battery upright.
A perfect match for our sew-able coin cell holder. This non-rechargeable coin cell is CR2032 sized: 20mm diameter, 3.2mm thick. It...
Out of Stock
Angled shot of a 20mm Coin Cell Breakout Board w/ On-Off Switch.
Simple but effective - this sewable breakout board has a CR2032 coin cell battery holder soldered on, an on/off switch and 0.1" pitch breakout pins for easy connecting. Great for...
guides with product
$3.50
In Stock
Vibrating Mini Motor Disc with two wires
*BZZZZZZZZZZ* Feel that? That's your little buzzing motor, and for any haptic feedback project you'll want to pick up a few of them. These vibe motors are tiny discs,...
Out of Stock