Camera Test

Save Subscribe

Install the Pi Camera module

Make sure you have the Pi camera module by running the following command:

Download File
Copy Code 
pip3 install picamera

Now that you have everything set up, it's time to do an initial test with the camera. This should display what the camera sees on the display.

raspistill -t 0

Exit the camera test by pressing CTRL + C

adafruit_products_Camera_Test.jpeg
 Kernel Module Troubleshooting Set up an FTP Connection 

This guide was first published on Mar 30, 2021. It was last updated on Mar 30, 2021.

This page (Camera Test) was last updated on Mar 30, 2021.

Text editor powered by tinymce.