# Mac Classic Fruit Jam
## Overview
3D print an Apple Macintosh Classic inspired enclosure for the Adafruit Fruit Jam. This build is designed to pair nicely with the [mac emulator project for Fruit Jam](https://learn.adafruit.com/fruit-jam-mac-emulator).
This guide covers the 3D printable CAD files, wiring, and assembly. Based off the original Mac Classic, this 3D build has a scale factor of 1:1.5.
With a total print time of 12 hours and 39 minutes, 436 grams of filament will be used. This project requires a 3D printer with a minimum bed size of 176mm x 162mm x 145mm.
## Features
The enclosure design has several features that take advantage of Fruit Jam.
- Print-in place hinged backdoor with twist lock
- SD card slot in place of floppy drive
- 800 x 480 HDMI display
- Front speaker
- USB-C power with 2x USB-A ports, STEMMA QT and 3-pin JST port
- No support material required
- Top handle, Adafruit logo, snap fit bottom and front plate
## Parts
### Adafruit Fruit Jam - Mini RP2350 Computer
[Adafruit Fruit Jam - Mini RP2350 Computer](https://www.adafruit.com/product/6200)
We were catching up on a recent [hackaday hackchat with eben upton](https://hackaday.io/event/202122-raspberry-pi-hack-chat-with-eben-upton) and learned some fun facts: such as the DVI hack for the RP2040 was inspired by
Out of Stock
[Buy Now](https://www.adafruit.com/product/6200)
[Related Guides to the Product](https://learn.adafruit.com/products/6200/guides)
### Mini Chiclet Keyboard - USB Wired - Black
[Mini Chiclet Keyboard - USB Wired - Black](https://www.adafruit.com/product/1736)
Add a good quality, slim keyboard to your Raspberry Pi, Beagle Bone Black, or other single-board-computer with this sleek black chiclet keyboard. It's a full QWERTY keyboard with a USB cable and is compatible with all operating systems. We tried many keyboards to find one that felt...
In Stock
[Buy Now](https://www.adafruit.com/product/1736)
[Related Guides to the Product](https://learn.adafruit.com/products/1736/guides)
### USB Wired Mouse - Two Buttons plus Wheel
[USB Wired Mouse - Two Buttons plus Wheel](https://www.adafruit.com/product/2025)
This is a mouse. A nice, simple mouse. No bells or whistles. Just a mouse.
But that doesn't mean it's not the best simple mouse! We compared a few and liked this one quite a bit. It's optical for good resolution and precision, has two...
In Stock
[Buy Now](https://www.adafruit.com/product/2025)
[Related Guides to the Product](https://learn.adafruit.com/products/2025/guides)
### Adafruit USB Type C Vertical Breakout - Downstream Connection
[Adafruit USB Type C Vertical Breakout - Downstream Connection](https://www.adafruit.com/product/5993)
Throw out all those Mini and Micro B USB cables you have in a plastic bin; the next generation of USB connectors is here with **USB C**! You will start to see these connectors pop up on all sorts of devices as the industry moves from micro B or lightening to the new standard....
In Stock
[Buy Now](https://www.adafruit.com/product/5993)
[Related Guides to the Product](https://learn.adafruit.com/products/5993/guides)
### USB C Jack to USB C Jack Round Panel Mount Adapter
[USB C Jack to USB C Jack Round Panel Mount Adapter](https://www.adafruit.com/product/4261)
If you need to add a panel-mount connection for USB C, but don't have the time or tools to cut a custom oval or square hole, this **USB C Jack to USB C Jack**** Round Panel Mount Plug** is the easiest and fastest way to panel-ify your project. It's about...
In Stock
[Buy Now](https://www.adafruit.com/product/4261)
[Related Guides to the Product](https://learn.adafruit.com/products/4261/guides)
### Part: 5 Inch HDMI Display
quantity: 1
ELECROW 800×480 Touch Screen
[5 Inch HDMI Display](https://www.amazon.com/dp/B0CYKXCM8J)
### Part: SD/MicroSD Memory Card
quantity: 1
8 GB SDHC – Adapter Included
[SD/MicroSD Memory Card](https://www.adafruit.com/product/1294)
### Part: DIY HDMI Cable Parts
quantity: 1
20 cm Ribbon Cable
[DIY HDMI Cable Parts](https://www.adafruit.com/product/3561)
### Part: DIY HDMI Cable Parts
quantity: 2
Right Angle (R bend) HDMI Plug Adapter
[DIY HDMI Cable Parts](https://www.adafruit.com/product/3549)
### Part: SD to MicroSD Extender
quantity: 1
23cm (9 inch) long cable
[SD to MicroSD Extender](https://www.adafruit.com/product/6060)
### Part: Slim Right Angle USB C
quantity: 1
USB C Cable - 100mm
[Slim Right Angle USB C](https://www.adafruit.com/product/6370)
### Part: Slim Right Angle USB C
quantity: 1
USB C Cable - 150mm
[Slim Right Angle USB C](https://www.adafruit.com/product/6371)
### Part: 1.25mm Pitch 2-pin Cable Matching Pair
quantity: 1
40cm long - Molex PicoBlade Compatible
[1.25mm Pitch 2-pin Cable Matching Pair](https://www.adafruit.com/product/4720)
### Part: Silicone Jumper Wires
quantity: 1
Male-Male Jumper Wires - 200mm x 40
[Silicone Jumper Wires](https://www.adafruit.com/product/4482)
### Part: Rubber Bumper Feet
quantity: 1
72Pcs Rubber Bumper Feet Assortment Kit
[ Rubber Bumper Feet](https://www.amazon.com/dp/B09LYT1NFP)
## Required Fasteners
- 10x M2.5 x 6mm steel machine screws
- 8x M3 x 6mm steel machine screws
- 15x M3 x 8mm steel machine screws
# Mac Classic Fruit Jam
## CAD Files
## CAD Assembly
The main assembly is available in Fusion 360 and STEP file formats. This includes all of the 3D printed parts and electronic components used in the project. Use the main assembly to create any edits, updates, or modifications.
## 3D Printed Parts
Individual 3MF files for 3D printing are oriented and ready to print on FDM machines using PLA filament. Original design source may be downloaded using the links below. Use a black colored filament for the following parts.
- Display Mount
- SD Card Mount
[Download CAD Source Files](https://cdn-learn.adafruit.com/assets/assets/000/140/688/original/CAD.zip?1761050710)
[Download 3MF.zip](https://cdn-learn.adafruit.com/assets/assets/000/140/689/original/3MF.zip?1761050737)
## Build Volume
The parts require a 3D printer with a minimum build volume of 162mm (X) x 176mm (Y) x 145mm (Z).
## PLA Filament
A white colored PLA filament works best for emulating the classic retro enclosures. A good options is [Polymaker Panchroma Matte Cotton White](https://www.amazon.com/Polymaker-Panchroma-Filament-Printing-Printers/dp/B0D7ZW4P79).
## Design Source Files
The project assembly was designed in Fusion 360. Once opened in Fusion 360, It can be exported in different formats like STEP, STL and more.
Electronic components like Adafruit's boards, displays, connectors and more can be downloaded from the [Adafruit CAD parts GitHub Repo](https://github.com/adafruit/Adafruit_CAD_Parts/).
# Mac Classic Fruit Jam
## Circuit Diagram
The diagram below provides a general visual reference for wiring of the components once you get to the **Assembly** page. This diagram was created using the software package [Fritzing](http://fritzing.org/download/).
## Adafruit Library for Fritzing
Adafruit uses the Adafruit Fritzing parts library to create circuit diagrams for projects. You can download the library or just grab individual parts. Get the library and parts from [GitHub - Adafruit Fritzing Parts](https://github.com/adafruit/Fritzing-Library/tree/master/parts).
## Wired Connections
- **5V** to **VBUS** pin on **USB-C Breakout**
- **GND** to **GND** pin on **USB-C Breakout**
The **Adafruit Fruit Jam** is powered via USB.
# Mac Classic Fruit Jam
## Assembly
## Parts
Gather up the parts and required fasteners for the build.
## Prep HDMI cable
Get the ribbon cable and two Right Angle (R bend) HDMI Plug Adapter ready.
Open the release latch from the two HDMI plug adapters.
Insert the HDMI ribbon cable into each end of the HDMI adapters using the flex cable clips.
## USB-C Breakout Jumper Wires
Get two silicone covered jumper wires from the pack, preferably a blue and red colored set.
Using wire cutters, remove the connector from one end of each wire.
Then, solder the blue jumper wire to the **GND** (ground) pin on the USB-C breakout.
Solder the red jumper wire to the **VBUS** pin on the USB-C breakout.
## Secure USB-C Breakout
Get the 3D printed USB mount, fasteners and USB-C breakout ready.
Use four M2.5 x 6mm long machine screws to secure the USB-C breakout to the USB mount.
Double check the breakout has been correctly mounted to the 3d printed part.
## Prep PicoBlade Cable
Get the matching pair of the 2-pin picoBlade cables ready to solder together.
Cut two pieces of 30AWG heat shrink tubing and slip them onto one set of the picoBlade cables. One of each wire.
Using helping hands, prop the wires up so their overlapping.
Join the matching wires from the two cables by soldering them together.
Slip the pieces of heat shrink over the solder joints and apply heat to shrink.
Set the assembled picoBlade cable aside.
## Install Door Latch
Rotate the print-in-place door knob on the main enclosure so its orientation matches the assembly photo.
Place the 3D printed door latch onto the door knob with the two mounting holes lined up.
Use two M2.5 x 6mm long machine screws to secure the 3D printed door latch to the knob on the main enclosure.
Test the door knob by twisting it on the other side of the case. It should be able to lock and open the print-in-place door.
## Install USB-C Adapter
Get the USB-C Panel Mount Adapter ready to install into the 3D printed base.
Remove the threaded nut from the body of the USB-C adapter by unscrewing it.
Insert the USB-C adapter into the circular hole on the side of 3D printed base with the various cutouts.
Fasten the threaded nut back onto the body with the wide flange facing away from the surface of the base – This will allow the bottom cover to set flush with the base.
Warning: Double check the threaded nut is oriented correctly before proceeding with the assembly!
## Secure Fruit Jam
Get the Fruit Jam, fasteners and 3D printed PCB mount ready to assemble.
Place the Fruit Jam over the 3D printed PCB mount so the mounting holes are lined up correctly – one of the standoffs features a pin that will fit into the mounting hole that doesn't have a soldered standoff.
Insert and fasten three M3 x 8mm long machine screws to secure the Fruit Jam to the 3D printed PCB mount.
## Secure PCB Mount
Get the Fruit Jam with the PCB Mount ready to secure to the 3D printed bottom cover.
Place the Fruit Jam onto the bottom cover so the USB ports are facing out and the mounting holes are lined up.
Insert and fasten four M3 x 8mm long machine to secure the PCB Mount to the bottom cover.
## Install Rubber Bumpers
Select your preferred size of rubber bumpers to attach on the bottom cover. (I used four of the 0.6" sized rubber feet from the assortment kit).
Use your preferred adhesive or double-sided tape to attach the bumper feet.
## Secure 5in Display
Get the 5 inch HDMI display, fasteners and 3D printed display mount ready to assemble.
Orient the 5" HDMI display with the display mount so it matches the assembly photo.
Place the 5" HDMI display onto the display mount so the mounting holes are lined up with the standoffs.
Insert and fasten four M3 x 6mm long machine screws to secure the display.
## SD Adapter Prep
A [spudger prying tool](https://www.adafruit.com/product/3434) will be used to disassemble the plastic injection molded case of the SD card adapter.
Using the [prying tool](https://www.adafruit.com/product/3434), slide the edge in between the halves of the enclosure.
Pop open the enclosure and remove the PCB of the SD card adapter.
Discard or set aside the halves, they won't be needed in this build.
## Secure SD Card Adapter
Get the SD card adapter PCB, fasteners, 3D printed SD card cover and front panel ready to assemble.
Orient the 3D printed SD card cover with the SD card adapter so it matches the assembly photo.
Place the SD card cover over the SD card adapter PCB.
Place the SD card adapter assembly over the built-in mounting plate on the 3D printed front.
Insert and fasten four M3 x 8mm long screws to secure the SD card adapter assembly to the 3D printed front panel.
## Test SD Card
Insert an SD card to the SD card adapter through the slot on the 3D printed front panel.
Push in the SD card to actuate the spring-loaded mechanism to eject the SD card.
## Secure USB-C Mount
Get the assembled USB-C mount, fasteners and display mount ready to assemble.
Place the USB-C mount over the built-in standoffs on the 5" HDMI display so the mounting holes are lined up.
Insert and fasten four M2.5 x 6mm long machine screws to secure the USB mount to the display.
## Secure Display Mount
Get the display mount, fasteners and front panel ready to assemble.
Place the display mount over the standoffs on the front panel so the mounting holes are lined up.
Insert and fasten four M3 x 6mm long machine screws to secure the display mount to the front panel.
## Install USB-C Cable
Get the 100mm long USB-C cable ready.
Plug-in one end of the cable to the USB-C port on the 5in HDMI display and the other end to the USB-C socket on the USB-C breakout.
## Connect HDMI Cable
Insert one end of the HDMI cable to the 5" HDMI display so the ribbon cable is facing out away from the front panel.
## Join Base to Case
Get the 3D printed base, fasteners and case ready to assemble.
Orient the base with the case so the side with the various cutouts are facing the side of the case with the door.
Join the two parts together so the four mounting tabs are lined up.
Insert and fasten four M3 x 8mm long screws to secure the two parts together.
## Install On/Off Switch
Get the switch and switch clip ready to install into the case assembly.
Insert the switch into the matching cutout on the base.
While holding the switch in place, slide the switch clip on so the grooves are lined up with the notches. This will keep the switch in place and prevents it from fall out of the base.
Test the switch by sliding it to the left and right. It should freely slide between the two sides.
## Install Speaker
Get the mini oval speaker ready to install into the base.
Remove the protective cover from the front size of the mini oval speaker by peeling it off.
Position and place the mini over speaker into the cavity built-into the base. Gently press on the speaker to adhere it into place.
## Join Front to Case
Get the front panel assembly and case assembly ready to snap fit together.
Orient the two parts and place the various cables inside the case.
Firmly press the two parts together to snap fit them shut.
## Connect PicoBlade Cable
Lay the assembled case on its side and grab hold of the cable from the speaker.
Connect the 2-pin picoBlade cable to the speaker.
## Connect USB-C Cable
Get the bottom cover and 150mm long USB-C cable ready.
Plug in one end of the USB-C cable to the USB-C panel mount adapter.
Then, plug in the other end of the cable to the USB-C port on the Fruit Jam.
## Connect SD Card Adapter
Grab hold of the micro SD card adapter cable and connect it to the micro SD card slot on the Fruit Jam.
## Connect Speaker
Grab hold of the cable from the speaker and connect it to the speaker audio port on the Fruit Jam.
## Install Bottom to Case
Orient the bottom cover with the case assembly so the various ports on the Fruit Jam are facing the various cutouts on the base.
Take note of the position of the 3D printed switch with the built-in switch on the Fruit Jam. They ought to be in the same position.
Insert the bottom at an angle so the USB-A ports are fitted through the rectangular cutouts on the base.
Firmly press the two parts together to snap fit them closed.
## Connect USB-C Jumpers
Unlock the latch from the door on the case to open it.
Grab hold of the two jumper wires from the USB-C breakout.
Plug the red jumper wire to the **5V** header pin on the Fruit Jam, then plug the blue jumper wire to the **GND** pin.
## Close Door
Ensure all of the cables are inside the case.
Close the door and twist the knob to lock the door latch.
## Build Check
Take a moment to inspect all sides and various ports on the enclosure.
## Install SD Card
If you haven't already, pop the SD card into the slot. Any files, ROMs and code should be loaded on the card prior to insertion.
# Mac Classic Fruit Jam
## Software
## Choose Your Own Adventure
There are several emulators available for the Adafruit Fruit Jam. You have the option to switch between them by going into boot loader mode via boot+reset button on the Fruit Jam. Then, drag and drop your desired UF2 firmware file. With Fruit Jam, it's easy to switch between Mac OS, NES, Fruit Jam, and my favorite, DOOM.
## Pico-Mac Emulator for Mac Classic
The [pico-mac-adafruit\_fruit\_jam-4096k-800x480-psram-oc.uf2](https://github.com/adafruit/pico-mac/releases/download/1.0.0-alpha.4/pico-mac-adafruit_fruit_jam-4096k-800x480-psram-oc.uf2) is suggested for this project. Download and flash that UF2 file onto the Fruit Jam while it's in [boot loader mode](https://learn.adafruit.com/fruit-jam-mac-emulator/software-prep) (You will see a disk drive appear called **RP2350** ). Then, download the [macImage.img](https://learn.adafruit.com/fruit-jam-mac-emulator/software-prep#microsd-card-3204716) and rename it to **umac0w.img**. Copy that image onto your SD card and pop it into the SD card slot on the Mac Classic build. The Fruit Jam will boot up using the image provided.
## Additional Firmware Options
Click on the links below and walkthrough the firmware installation.
- [Mac Emulator for Fruit Jam](https://learn.adafruit.com/fruit-jam-mac-emulator)
- [Apple II Emulator for Fruit Jam](https://learn.adafruit.com/apple-e-emulator-on-fruit-jam)
- [DOOM for Fruit Jam](https://learn.adafruit.com/doom-on-fruit-jam)
- [NES Emulator for Fruit Jam](https://learn.adafruit.com/fruit-jam-nintendo-entertainment-system)
- [CircuitPython Fruit Jam OS](https://learn.adafruit.com/fruit-jam-os)
# Mac Classic Fruit Jam
## Usage
## Boot Loader Mode
Go into boot loader mode to install new firmware on the Fruit Jam. To do this, you'll want to open the back door and follow the sequence.
To enter the bootloader, hold down the **BOOT/**** button #1 **(highlighted in red above), and while continuing to hold it (don't let go!), press and release the **reset button **(highlighted in blue above).**Continue to hold the BOOT/button #1 until the RP2350 drive appears!**
If the drive does not appear, release all the buttons, and then repeat the process above.
A lot of people end up using charge-only USB cables and it is very frustrating! ** Make sure you have a USB cable you know is good for data sync.**
## Connect Power, Mouse and Keyboard
To power the Fruit Jam, use a USB-C cable and connect it to either your computers USB hub or 5V USB power supply.
Connect your preferred keyboard and mouse to the USB-A ports on the Fruit Jam.
## Switch On/Off
Use the 3D printed switch to power the Fruit Jam on or off. Slide to the right to power on. Slide left to power off.
## Featured Products
### Premium Silicone Covered Male-Male Jumper Wires - 200mm x 40
[Premium Silicone Covered Male-Male Jumper Wires - 200mm x 40](https://www.adafruit.com/product/4482)
These premium male-male jumper wires are handy for making wire harnesses or jumpering between headers on PCBs. They're 200mm (~7.8") long and come loose as a pack of 40 (10 pieces of red, blue, yellow, and Adafruit black). They have 0.1" male header contacts on...
In Stock
[Buy Now](https://www.adafruit.com/product/4482)
[Related Guides to the Product](https://learn.adafruit.com/products/4482/guides)
### 1.25mm Pitch 2-pin Cable Matching Pair - 40cm long
[1.25mm Pitch 2-pin Cable Matching Pair - 40cm long](https://www.adafruit.com/product/4720)
When 0.1" is too big, and JST PH's too chunky, these ultra-slim 1.25mm connectors are a reliable alternative. These are only 1.25mm pitch, but have a nice clicky connection.
These cables are nice and long, 40cm in fact. They've got both small form factor and are a...
In Stock
[Buy Now](https://www.adafruit.com/product/4720)
[Related Guides to the Product](https://learn.adafruit.com/products/4720/guides)
### Slim Right Angle USB C to USB C Cable - 150mm
[Slim Right Angle USB C to USB C Cable - 150mm](https://www.adafruit.com/product/6371)
We used a cable like this in a recent build and decided it's perfect for when you want to make a compact USB-C-to-C connection in an enclosure. The metal plugs are durable and easy to grip for plugging and unplugging, while the ribbon cable is flexible and short. Also great for going...
In Stock
[Buy Now](https://www.adafruit.com/product/6371)
[Related Guides to the Product](https://learn.adafruit.com/products/6371/guides)
### Slim Right Angle USB C to USB C Cable - 100mm
[Slim Right Angle USB C to USB C Cable - 100mm](https://www.adafruit.com/product/6370)
We used a cable like this in a recent build and decided it's perfect for when you want to make a compact USB-C-to-C connection in an enclosure. The metal plugs are durable and easy to grip for plugging and unplugging,...
In Stock
[Buy Now](https://www.adafruit.com/product/6370)
[Related Guides to the Product](https://learn.adafruit.com/products/6370/guides)
### DIY HDMI Cable Parts - Right Angle (R bend) HDMI Plug Adapter
[DIY HDMI Cable Parts - Right Angle (R bend) HDMI Plug Adapter](https://www.adafruit.com/product/3549)
If you love DIY cable-rigging, then these HDMI adapters are right up your alley! Making custom HDMI cables has never been easier. Just grab one of our [HDMI ribbon cables](https://www.adafruit.com/product/3588?q=HDMI%20Ribbon%20Cable&), then swap and switch any of our HDMI...
In Stock
[Buy Now](https://www.adafruit.com/product/3549)
[Related Guides to the Product](https://learn.adafruit.com/products/3549/guides)
### SD to MicroSD Extender
[SD to MicroSD Extender](https://www.adafruit.com/product/6060)
Stop fiddling with SD card sockets in the back of your latest gadget, and streeeeeeeeeetch out with an **SD Card Extender**. This simple, but effective device gives you a long flexible cable, a pseudo-card on one end, and an SD card socket on the other. Plug in the SD card...
In Stock
[Buy Now](https://www.adafruit.com/product/6060)
[Related Guides to the Product](https://learn.adafruit.com/products/6060/guides)
### SD/MicroSD Memory Card (8 GB SDHC)
[SD/MicroSD Memory Card (8 GB SDHC)](https://www.adafruit.com/product/1294)
Add mega-storage in a jiffy using this 8 GB class 4 micro-SD card. It comes with a SD adapter so you can use it with any of our shields or adapters. Preformatted to FAT so it works out of the box with our projects. Tested and works great with our
In Stock
[Buy Now](https://www.adafruit.com/product/1294)
[Related Guides to the Product](https://learn.adafruit.com/products/1294/guides)
### USB C Jack to USB C Jack Round Panel Mount Adapter
[USB C Jack to USB C Jack Round Panel Mount Adapter](https://www.adafruit.com/product/4261)
If you need to add a panel-mount connection for USB C, but don't have the time or tools to cut a custom oval or square hole, this **USB C Jack to USB C Jack**** Round Panel Mount Plug** is the easiest and fastest way to panel-ify your project. It's about...
In Stock
[Buy Now](https://www.adafruit.com/product/4261)
[Related Guides to the Product](https://learn.adafruit.com/products/4261/guides)
## Related Guides
- [Using a Mouse with USB Host](https://learn.adafruit.com/using-a-mouse-with-usb-host.md)
- [Using a Keyboard with USB Host](https://learn.adafruit.com/using-a-keyboard-with-usb-host.md)
- [Adafruit Fruit Jam](https://learn.adafruit.com/adafruit-fruit-jam.md)
- [USB to Eurorack Power Supply](https://learn.adafruit.com/usb-to-eurorack-power-supply.md)
- [BLE Feather Lamp](https://learn.adafruit.com/ble-feather-lamp.md)
- [Lightsaber Prop-Maker RP2040](https://learn.adafruit.com/lightsaber-rp2040.md)
- [Feather RP2040 DVI CircuitPython Day 2024 Countdown Clock](https://learn.adafruit.com/feather-rp2040-dvi-circuitpython-day-2024-countdown-clock.md)
- [ Memory-saving tips for CircuitPython](https://learn.adafruit.com/memory-saving-tips-for-circuitpython.md)
- [Raspberry Pi Pipboy 3000](https://learn.adafruit.com/raspberry-pi-pipboy-3000.md)
- [CLUE Slim Case](https://learn.adafruit.com/clue-slim-case.md)
- [3D Printed LED-Animation BMO](https://learn.adafruit.com/3d-printed-led-animation-bmo.md)
- [Trinket NeoPixel LED Longboard](https://learn.adafruit.com/trinket-neopixel-led-longboard.md)
- [Moana Glowing Heart of Te Fiti Necklace](https://learn.adafruit.com/moana-glowing-heart-of-te-fiti-necklace.md)
- [Scrolling Countdown Timer](https://learn.adafruit.com/scrolling-countdown-timer.md)
- [3D Printed Raspberry Pi B+ Enclosure](https://learn.adafruit.com/3d-printed-raspberry-pi-b-plus-enclosure.md)
- [Flappy Nyan Cat Game on Fruit Jam and Metro RP2350](https://learn.adafruit.com/flappy-nyan-cat-game-on-metro-rp2350.md)
- [LED Emerald with Circuit Playground Bluefruit](https://learn.adafruit.com/led-emerald-with-circuit-playground.md)
- [1.8" TFT Display Breakout and Shield](https://learn.adafruit.com/1-8-tft-display.md)