Setting up model

 

Orient STL files for 3D printing for FDM style machines. Parts are designed to 3D print with support material. You can also split models into pieces and glue together.

To diffuse the LEDs, you can 3D print them with zero infill to make them hollow.

Slicing Parts

Slice with setting for PLA material. 


The parts were sliced using CURA using the slice settings below.

  • PLA filament 220c extruder
  • 0.1 layer height
  • 10% gyroid infill
  • 60mm/s print speed
  • 60c heated bed

This guide was first published on Aug 02, 2022. It was last updated on Mar 31, 2024.

This page (3D Printing) was last updated on Mar 08, 2024.

Text editor powered by tinymce.