In this project, we are scanning statues to 3d print low poly miniatures!

You can 3D scan statues from museums, art galleries or historic sites to make custom keepsakes.

Use them as a base for custom models like planters or book ends. This is also great for accessibility!

With an Adafruit Qt Py and a NeoPixel Stick, you can make them glow to make a custom lamp.

To diffuse the LEDs, you can 3D print them with zero infill to make them hollow.

Using photogrammetry, we can generate detailed 3d scans and use a low polygon generator to make artistic renditions.

We had a lot of fun printing these and think it’s a great way to experience works of art when you aren’t physically able to travel. It’s also great for archiving! 

Being able to touch and feel objects that are protected from the public is a great use of this technique!

Parts 

1 x Polycam
Polycam photogrammetry Mobile App (App Store, Google Play, Web)
1 x 3D Low Poly Generator
3D Low Poly Generator by Andrew Sink (web app)
1 x Blender
Open source 3D computer graphics software
Spool of NinjaFlex Filament for 3D Printers - semi translucent white color with 1.75mm Diameter.
Looking beyond ABS? Tired of PLA? Open a world of possibilities, limited only by your imagination. NinjaFlex, a cutting-edge filament for 3D printers, is a specially formulated...
$29.95
In Stock
Video of hand holding a QT Py PCB in their hand. An LED glows rainbow colors.
What a cutie pie! Or is it... a QT Py? This diminutive dev board comes with one of our new favorite chip, the RP2040. It's been made famous in the new
Out of Stock
Video of a person with white painted nails unplugging a USB cable from a small, black, square-shaped lipo battery breakout board soldered to a similarly shaped microcontroller, which is also connected to a monochrome OLED display breakout. The OLED breakout displays battery and power data.
Is your QT Py all alone, lacking a friend to travel the wide world with? When you were a kid you may have learned...
$4.95
In Stock
NeoPixel Stick with 8 x 5050 RGB LED
Make your own little LED strip arrangement with this stick of NeoPixel LEDs. We crammed 8 of the tiny 5050 (5mm x 5mm) smart RGB LEDs onto a PCB with mounting holes and a chainable...
$5.95
In Stock
Angled shot of a Lithium Ion Polymer Battery 3.7V 500mAh with JST-PH connector.
Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This...
$7.95
In Stock

This guide was first published on Aug 02, 2022. It was last updated on Jul 27, 2022.

This page (Overview) was last updated on Jul 27, 2022.

Text editor powered by tinymce.