Build Lola, the companion droid to young Princess Leia.

This cute shoulder bot emotes by flapping her wings and blinking both LED eyes. Small and light enough to carry around on your next mission!

Embedded magnets allow Lola to attach to your shoulder or metal surfaces!

Animatronic Wings


Two micro servos articulate each wing by pushing under the panel. This makes it simple to assemble and less likely to strip the servos. 

 

Mount with Magnets 


The bottom of the body feature spots for press fitting magnets to attach to legs, shoulders or metal objects!

ItsyBitsy RP2040


Powered by the ItsyBitsy RP2040. This dev board is packed with lots of great features and has the ability to use both Arduino and CircuitPython.

Parts

Video of hand holding an ItsyBitsy PCB. An on-board LED glows rainbow colors.
A new chip means a new ItsyBitsy, and the Raspberry Pi RP2040 is no exception. When we saw this chip we thought "this chip is going to be awesome when we give it the ItsyBitsy...
$9.95
In Stock
Adafruit LiIon/LiPoly Backpack soldered onto a Pro Trinket, plugged into a solderless breadboard.
If you have an ItsyBitsy or Pro Trinket you probably know it's the perfect little size for a portable project. This LiPoly backpack makes it really easy to do! Instead of wiring 2...
$4.95
In Stock
Micro servo with three pin cable
Tiny little servo can rotate approximately 180 degrees (90 in each direction) and works just like the standard kinds you're used to but smaller. You can use any servo...
$5.95
In Stock
NeoPixel Jewel - 7 x 5050 RGB LED wired to Trinket, lit up rainbow
Be the belle of the ball with the NeoPixel Jewel!  We fit seven of our tiny 5050 (5mm x 5mm) smart RGB LEDs onto a beautiful, round PCB with mounting holes and a...
$5.95
In Stock
Glowing NeoPixel Mini Button PCB wired up to a microcontroller
These are the smallest NeoPixel breakouts around! Tiny, bright RGB pixels to your project. These little PCBs are only 8mm x 10mm and have two sets of three pads on the back for...
$4.95
In Stock
Lithium Ion Polymer Battery 3.7v 2000mAh with JST 2-PH connector
Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This...
Out of Stock
1 x USB Cable
USB C to Micro B - 1 ft / 0.3 meter
1 x Pin Back
Magnetic
1 x Slide Switch
Breadboard-friendly SPDT Switch
1 x Male Header
36-pin 0.1" Short Break-away, Pack of 10
1 x Female Header Set
Header Kit for Feather - 12-pin and 16-pin Female Header Set
1 x Spudger Tool
Double Sided

This guide was first published on Jul 05, 2022. It was last updated on Jul 05, 2022.

This page (Overview) was last updated on Jul 01, 2022.

Text editor powered by tinymce.