Parts List

STL files for 3D printing are oriented to print "as-is" on FDM style machines. Parts are designed to 3D print without any support material. Original design source may be downloaded using the links below.

Slice with settings for PLA material 


The parts were sliced using CURA using the slice settings below.

  • PLA filament 220c extruder
  • 0.2 layer height
  • 10% gyroid infill
  • 60mm/s print speed
  • 60c heated bed

Supports

  • Support Extrusion Width: .2
  • Support Density: 4%
  • Support Overhang Angle: 50
  • Support Z Height: .21
  • Interface: On
  • Support Roof: On
  • Support Pattern: Zig Zag

Build Plate Adhesion

  • Type: brim
  • Line Count: 8

Painting


Use a metallic paint to give the body a shine coat. It will take four to five coats to cover the droid.

This guide was first published on Jul 05, 2022. It was last updated on 2022-07-05 22:35:39 -0400.

This page (3D Printing) was last updated on Oct 04, 2022.

Text editor powered by tinymce.