Hardware

Angled shot of Raspberry Pi 4
NOTE: Due to stock limitations we may only be able to offer refunds or store credit for Pis that are defective, damaged or lost in...
Out of Stock
Angled shot of Raspberry Pi Camera Board v2 - 8 Megapixels connected to a flex cable and a Raspberry Pi.
Snap, snap! The Camera v2 is the new official camera board released by the Raspberry Pi Foundation!The Raspberry Pi Camera Board v2 is a high quality 8...
Out of Stock
Angled shot of Official Raspberry Pi Power Supply 5.1V 3A with USB C with Power plug facing down.
The official Raspberry Pi USB-C power supply is here! And of course, we have 'em in classic Adafruit black! Superfast with just the right amount of cable length to get your Pi 4...
$7.95
In Stock
Hand removing/installing micro SD card from SD adapter
Add mega-storage in a jiffy using this 8 GB class 4 micro-SD card. It comes with a SD adapter so you can use it with any of our shields or adapters. Preformatted to FAT so it works out...
$9.95
In Stock
Angled shot of half-size solderless breadboard with red and black power lines.
This is a cute, half-size breadboard with 400 tie points, good for small projects. It's 3.25" x 2.2" / 8.3cm x 5.5cm with a standard double-strip in the...
$4.95
In Stock
1 x Pushbutton
On/Off
1 x LEDs
4 indicator LEDs, 1 status LED (5 total)
1 x 220 Ohm Resistors
Need 6 of 25
1 x Jumper wires
Male-Male

Enclosure

  • Project case (e.g. cardboard, wood, or plastic box, approx. 6" x 5" x 4")
  • 0.5" x 0.5" (2cm x 2cm) clear plastic square
    • E.g. from a plastic food container lid
  • Velcro

Tools

Software (PC-side)

  • Lobe
  • WinSCP (or other SSH file transfer method, can use CyberDuck for Mac)
  • Terminal
  • Remote Desktop Connection or RealVNC

This guide was first published on Oct 22, 2020. It was last updated on Oct 22, 2020.

This page (Tools and Materials) was last updated on Jun 29, 2022.

Text editor powered by tinymce.