The diagram below provides a general visual reference for wiring of the components once you get to the Assembly page. This diagram was created using the software package Fritzing.

Adafruit Library for Fritzing

Adafruit uses the Adafruit's Fritzing parts library to create circuit diagrams for projects. You can download the library or just grab individual parts. Get the library and parts from GitHub - Adafruit Fritzing Parts.

Wired Connections

• The NeoPixel strip, button switch, and speaker are each connected to pins on the screw block terminal.
• The slide switch is connected to the EN and GND pins on the Feather.
• A 2200mAh battery is connected to the battery port on the Feather.
• The RGB LED in the button switch has the following connections:
  • R pin to D10 on Feather
  • G pin to D11 on Feather
  • B pin to D12 on Feather
  • + pin to 3V on Feather