Circuit Test

With the buttons and speaker now wired to the Prop-Maker FeatherWing, we can power up the circuit to test them out. The code and libraries should be uploaded to the Adafruit Feather. Connect all of the components before plugging in the battery. 

Trouble Shooting

The on-board NeoPixel will light up green if the code, wave files and libraries are good. If something isn't quite right, the NeoPixel will flash blue, yellow or red. Here are some common things to look for.

  • Required Libraries: 
    • adafruit_LIS3HD
    • adafruit_bus_device
    • neopixel

This guide was first published on Oct 31, 2018. It was last updated on Apr 12, 2024.

This page (Testing Components) was last updated on Mar 08, 2024.

Text editor powered by tinymce.