Featured
This soft fabric ribbon has tiny surface mount LEDs bonded onto two thin conductive threads that go along the length. A tiny battery pack controller snaps onto the end. The result is an ultra-flexible and elegant-looking way to add LEDs to a wearable project.This ribbon is...
No Longer Stocked
Featured
This soft fabric ribbon has tiny surface mount LEDs bonded onto two thin conductive threads that go along the length. A tiny battery pack controller snaps onto the end. The result is an ultra-flexible and elegant-looking way to add LEDs to a wearable project.This ribbon is...
No Longer Stocked
Featured
This soft fabric ribbon has tiny surface mount LEDs bonded onto two thin conductive threads that go along the length. A tiny battery pack controller snaps onto the end. The result is an ultra-flexible and elegant-looking way to add LEDs to a wearable project.This ribbon is...
No Longer Stocked
Featured
This soft fabric ribbon has tiny surface mount LEDs bonded onto two thin conductive threads that go along the length. A tiny battery pack controller snaps onto the end. The result is an ultra-flexible and elegant-looking way to add LEDs to a wearable project.This ribbon is...
No Longer Stocked
Featured
Add sparkle to your project with these lovely silver wire LED strands. These strands are very interesting, they use two silver wires that are coated so they don't short if they touch, then tiny 1000mcd LEDs are bonded onto the wires and coated with epoxy. The result is a very flexible...
No Longer Stocked
Featured
Add sparkle to your project with these lovely silver wire LED strands. These strands are very interesting, they use two silver wires that are coated so they don't short if they touch, then tiny 1000mcd LEDs are bonded onto the wires and coated with epoxy. The result is a very flexible...
No Longer Stocked
Featured
Add sparkle to your project with these lovely silver wire LED strands. These strands are very interesting, they use two silver wires that are coated so they don't short if they touch, then tiny 1000mcd LEDs are bonded onto the wires and coated with epoxy. The result is a very flexible...
No Longer Stocked
Featured
Discontinued - you can grab Wire Light LED Strand - 12 Cool White LEDs + Coin Cell Holder instead! Add sparkle to your project with these lovely silver wire LED strands. These...
No Longer Stocked
Featured
Add sparkle to your project with these lovely silver wire LED strands. These strands are very interesting, they use two silver wires that are coated so they don't short if they touch, then tiny 1000mcd LEDs are bonded onto the wires and coated with epoxy. The result is a very flexible...
No Longer Stocked
Featured
Need some really bright LEDs? We are big fans of these clear white LEDs, in fact we use them exclusively in our kits. They are very bright and have about 25 degree LED beam so they're good for illumination, head lamps, spotlights, etc. They go easily into a breadboard and will add that...
$6.95 each
In Stock
Featured
Need some really bright LEDs? We are big fans of these clear red LEDs, in fact we use them exclusively in our kits. They are very bright and have about 20degree LED beam. They go easily into a breadboard and will add that extra zing to your project.Pack of 25 clear red...
$8.00 each
In Stock
Featured
Need some really bright LEDs? We are big fans of these clear green LEDs, in fact we use them exclusively in our kits. They are very bright and have about 20degree LED beam. They go easily into a breadboard and will add that extra zing to your project.Pack of 25 clear green...
$8.00 each
In Stock
Featured
Need some really bright LEDs? We are big fans of these clear blue LEDs, in fact we use them exclusively in our kits. They are very bright and have about 20degree LED beam. They go easily into a breadboard and will add that extra zing to your project.Pack of 25 clear blue...
$8.00 each
In Stock
Featured
Need some really bright LEDs? We are big fans of these 5mm clear UV / Purple LEDs. These emit UV 'blacklight' in the UVA spectrum so they are great for projects with fluorescent materials referred to as UV/blacklight-reactive or 'glow-in-the dark'. They are...
$4.95 each
In Stock
Featured
Need some indicators? We are big fans of these diffused red LEDs, in fact we use them exclusively in our kits. They are fairly bright so they can be seen in daytime, and from any angle. They go easily into a breadboard and will add that extra zing to your project.Pack of 25...
$4.00 each
In Stock
Featured
Need some indicators? We are big fans of these diffused green LEDs, in fact we use them exclusively in our kits. They are fairly bright so they can be seen in daytime, and from any angle. They go easily into a breadboard and will add that extra zing to your project.Pack of 25...
$4.00 each
In Stock
Featured
These are very interesting 5mm diffused RGB LEDs - instead of having 4 pins to control 3 LEDs, they have only two leads - power and ground. When powered, the LEDs perform a slow fade through the rainbow, from red to orange to yellow, etc till they get back to red. See the...
$4.95 each
In Stock
Featured
These are very interesting 5mm diffused RGB LEDs - instead of having 4 pins to control 3 LEDs, they have only two leads - power and ground. When powered, the LEDs perform a flashing effect with all the colors. See the video below for the timing and look. There is no way to change the...
$4.95 each
In Stock
Featured
Need some really bright and big indicator LEDs? We are big fans of these 10mm diffused white LEDs. They go easily into a breadboard and will add that extra zing to your project.Pack of 25 diffused white LEDs10mm diameterCool White color3.0-3.4V Forward...
$7.95 each
In Stock
Featured
Need some big indicators? We are big fans of these huge diffused red LEDs. They are fairly bright so they can be seen in daytime, and from any angle. They go easily into a breadboard and will add that extra zing to your project.Pack of 25 diffused red LEDs10mm...
No Longer Stocked
Featured
Need some big indicators? We are big fans of these huge 10mm diffused green LEDs. They are fairly bright so they can be seen in daytime, and from any angle. They go easily into a breadboard and will add that extra zing to your project.Pack of 25 diffused green LEDs10mm...
No Longer Stocked
Featured
Need some big indicators? We are big fans of these huge diffused blue LEDs. They are really bright so they can be seen in daytime, and from any angle. They go easily into a breadboard and will add that extra zing to your project.Pack of 25 diffused blue LEDs10mm...
No Longer Stocked
Featured
Need some indicators? We are big fans of these diffused white LEDs, as featured in the LoL shield. They are really bright so they can be seen in daytime, and from any angle. They go easily into a breadboard and will add that extra zing to your project.Pack of 25 diffused white...
$4.95 each
In Stock
Featured
Need some indicators? We are big fans of these diffused red LEDs, as featured in the LoL shield. They are fairly bright so they can be seen in daytime, and from any angle. They go easily into a breadboard and will add that extra zing to your project.Pack of 25 diffused red...
Out of Stock
Featured
Need some indicators? We are big fans of these diffused green LEDs, as featured in the LoL shield. They are fairly bright so they can be seen in daytime, and from any angle. They go easily into a breadboard and will add that extra zing to your project.Pack of 25 diffused green...
$4.95 each
In Stock
Featured
Need some indicators? We are big fans of these diffused blue LEDs, as featured in the LoL shield. They are really bright so they can be seen in daytime, and from any angle. They go easily into a breadboard and will add that extra zing to your project.Pack of 25 diffused blue...
$5.95 each
In Stock
Featured
These pretty strips of light are plastic diffused backlights, often seen in LCD displays. Normally they're tucked behind the LCD and shine white light from below. Here, we've got the LEDs available individually and they're really cool! Each LED is encased in a 3.5mm thick strip of...
$1.95 each
In Stock
Featured
These pretty strips of light are plastic diffused backlights, often seen in LCD displays. Normally they're tucked behind the LCD and shine white light from below. Here, we've got the LEDs available individually and they're really cool! Each LED is encased in a 3.5mm thick strip of...
$2.50 each
In Stock
Featured
These pretty strips of light are plastic diffused backlights, often seen in LCD displays. Normally they're tucked behind the LCD and shine white light from below. Here, we've got the LEDs available individually and they're really cool! Each LED is encased in a 3.5mm thick strip of...
$2.95 each
In Stock
Featured
This battery holder connects 3 AAA batteries together in series for powering all kinds of projects. We spec'd these out because the box is slim, and 3 AAA's add up to about 3.3-4.5V, a very similar range to Lithium Ion/polymer (Li-Ion) batteries and have an on-off switch. That makes...
$1.95 each
In Stock
Featured
Keep your power source safe and toasty in these waterproof 3xAA battery holders. They're just like classic switched battery holders, but designed for survival! The case has a rubber gasket around the edge of the case (its black and hard to see in the photos but it is there) and attaches...
$3.95 each
In Stock
Featured
This 'pen-style' soldering iron is just about the best entry-level tool I've seen. It's not as powerful as a Weller WES51 but it is self-contained and easy to use. With proper care, it will last for many years. Turn it off when not in use, clean the plated tip with a...
No Longer Stocked
Featured
A real stand with sponge and solidly-built sheet metal holder prevents your iron from 'rolling away' or burning a hole in the table. If you're starting out and have a 'pen type' soldering iron, this is essential for your safety. Comes with a sponge, too!
Out of Stock
Featured
Known by engineers for making excellent quality tools & soldering irons! This is a genuine Hakko FX-888D with digital temperature control! We worked hard to get the best and a great price, these are not knock-offs. This iron is an upgrade to the...
No Longer Stocked
Featured
We've upgraded our basic 'adjustable' wire strippers to these multi-sized wire strippers. They include: 20-30 AWG strippers, wire cutters, 'plier' tips, and a wire loop. Ground blades for precision cutting. Spring return, comfy molded handles and a closing-lock.
$6.95 each
In Stock
Featured
These are the best diagonal cutters, large super-comfortable grip to use and have strong nippers for perfect trimming of wires and leads. I've used my pair every day for years.
$7.25 each
In Stock
Featured
If you want to make a kit you'll need some solder. This 100g (about 1/4 lb) spool is just the right amount, not too much (like 1 lb spools) and not too little (like those little 'pocket clip' vials). 0.3mm diameter, 60/40 'no clean' rosin core. Good for all through-hole...
Out of Stock
Featured
Perfect for bread-boarding, free wiring, etc. This box contains 6 spools of solid-core wire. These spools of solid-core wires are easily soldered to, keeps its shape pretty well when bent and is rated 80C and 300V (UL AWM style 1007). We...
$15.95 each
In Stock
Featured
Perfect for bread-boarding, free wiring, etc. This spool of solid-core wire is easily soldered to and is rated 80C and 300V (UL AWM style 1007). When bent it keeps its shape pretty well. We like to have a few spools of this stuff around. We suggest picking up wire strippers to match. Wire...
$2.95 each
In Stock
Featured
Perfect for bread-boarding, free wiring, etc. This spool of solid-core wire is easily soldered to and is rated 80C and 300V (UL AWM style 1007). When bent it keeps its shape pretty well. We like to have a few spools of this stuff around. We suggest picking up wire strippers to match. Wire...
Out of Stock
Featured
Perfect for bread-boarding, free wiring, etc. This spool of solid-core wire is easily soldered to and is rated 80C and 300V (UL AWM style 1007). When bent it keeps its shape pretty well. We like to have a few spools of this stuff around. We suggest picking up wire strippers to match. Wire...
$2.95 each
In Stock
Featured
Heat shrink is the duct tape of electronics which I guess makes this heat shrink the colorful and exciting duct tape they sell at craft stores. This heat shrink comes in six different colors - red, blue, green, yellow, white and the traditional black.Each pack contains ten...
Out of Stock
Featured
After months of searching, we finally have what we consider to be the ultimate conductive thread. It's thin, strong, smooth, and made completely of 316L stainless steel. Once you start working with this thread you'll quickly agree its optimal for any wearables work!This...
$6.95 each
In Stock
Featured
Sew a little sparkle into your wearable project with an Adafruit LED Sequin. These are the kid-sister to our popular Flora NeoPixel, they only show a single color and they don't have digital control, but that makes them smaller easier to...
$3.95 each
In Stock
Featured
Sew a little sparkle into your wearable project with an Adafruit LED Sequin. These are the kid-sister to our popular Flora NeoPixel, they only show a single color and they don't have digital control, but that makes them smaller easier to...
$3.95 each
In Stock
Featured
Sew a little sparkle into your wearable project with an Adafruit LED Sequin. These are the kid-sister to our popular Flora NeoPixel, they only show a single color and they don't have digital control, but that makes them smaller easier to...
$3.95 each
In Stock
Featured
Sew a little sparkle into your wearable project with an Adafruit LED Sequin. These are the kid-sister to our popular Flora NeoPixel, they only show a single color and they don't have digital control, but that makes them smaller easier to...
$3.95 each
In Stock
Featured
This battery holder is by far the easiest way to add a battery to a small wearable project. By coincidence, there are two small 1mm diameter holes in the metal connection tabs, just large enough for a #5 or smaller needle to pass through. One tab connects to common ground (negative) and the...
$1.95 each
In Stock
Featured
You learned LEDs! (Light-emitting diodes)... Adafruit offers a fun and exciting "badges" of achievement for electronics, science and engineering. We believe everyone should be able to be rewarded for learning a useful skill, a badge is just one of the many ways to show and share.
No Longer Stocked
Featured
You learned LEDs! (Light-emitting diodes)... Adafruit offers a fun and exciting stickers to celebrate achievement for electronics, science and engineering. We believe everyone should be able to be rewarded for learning a useful skill, a sticker is just one of the many ways to show and...
No Longer Stocked
Featured
You can solder! Adafruit offers a fun and exciting "badges" of achievement for electronics, science and engineering. We believe everyone should be able to be rewarded for learning a useful skill, a badge is just one of the many ways to show and share.This is the "I...
No Longer Stocked
Featured
Discontinued - you can grab Blinka the CircuitPython Sticker instead! You can solder! Adafruit offers a fun and exciting stickers to celebrate achievement for electronics, science and engineering. We believe everyone...
No Longer Stocked
Featured
You learned and used Ohm's law! Adafruit offers a fun and exciting "badges" of achievement for electronics, science and engineering. We believe everyone should be able to be rewarded for learning a useful skill, a badge is just one of the many ways to show and share.
No Longer Stocked
Featured
You learned and used Ohm's law! Adafruit offers a fun and exciting stickers to celebrate achievement for electronics, science and engineering. We believe everyone should be able to be rewarded for learning a useful skill, a sticker is just one of the many ways to show and share.
No Longer Stocked
Featured
We sure love the ATmega328 here at Adafruit, and we use them a lot for our own projects. The processor has plenty of GPIO, Analog inputs, hardware UART SPI and I2C, timers and PWM galore - just enough for most simple projects. When we need to go small, we use a
view other guides that use this product
Out of Stock
Featured
Deprecation Warning: The Trinket bit-bang USB technique it uses doesn't work as well as it did in 2014, many modern computers won't work well. So while we still carry the Trinket so that people can maintain some older projects, we no longer recommend it.
view other guides that use this product
Out of Stock
Featured
FLORA is Adafruit's fully-featured wearable electronics platform. It's a round, sewable, Arduino-compatible microcontroller designed to empower amazing wearables projects.FLORA comes with Adafruit's support, tutorials and...
$14.95 each
In Stock
Featured
Deprecation Warning: The Gemma bit-bang USB technique it uses doesn't work as well as it did in 2014, many modern computers won't work well. So while we still carry the Gemma so that people can maintain some older projects, we no longer recommend it.
No Longer Stocked
Featured
What's a wearable project without LEDs? Our favorite part of the Flora platform is these tiny smart pixels. Designed specifically for wearables, these updated Flora NeoPixels have ultra-cool technology: these ultra-bright LEDs have a constant-current driver cooked right into the LED...
view other guides that use this product
Out of Stock
Featured
Squeeze once to turn on, squeeze again to turn off! This clicky switch makes a great power switch or mode toggler. We like this switch because it's easy to embed in a seam for easily powering up/off wearable and fabric projects. Can handle up to 14V and 2 Amps! This is a really satisfying...
$3.95 each
In Stock