The diagram below provides a general visual reference for wiring of the components once you get to the Assembly page. This diagram was created using the software package Fritzing.
Adafruit Library for Fritzing
Adafruit uses the Adafruit's Fritzing parts library to create circuit diagrams for projects. You can download the library or just grab individual parts. Get the library and parts from GitHub - Adafruit Fritzing Parts.
Wired Connections
- The speaker is connected to the pins on the screw block terminal
- The NeoPixel Strip is connected to the pins on the screw block terminal
- The servo plugs into the servo connection pins
- The slide switch is connected to the EN and GND pins on the Feather
- The USB battery plugs into the USB C port on the Feather
DC Motor in Micro Servo Body
Skip the micro controller and use a AAA or AA battery pack with an on and off switch.
Use two Plug to Plug jumper wires to connect the JST port on a battery pack to the DC servo, so no microcontroller is required at all!
Text editor powered by tinymce.
