The diagram below provides a visual reference for wiring of the components. This diagram was created using the software package Fritzing.

Adafruit Library for Fritzing

Use Adafruit's Fritzing parts library to create circuit diagrams for your projects. Download the library or just grab individual parts. Get the library and parts from GitHub - Adafruit Fritzing Parts.

Wired Connections

• 5V from LED Strip to 3V on Feather
• GND from LED Strip to GND on Feather
• DIN from LED Strip to Pin #6 on Feather
• Switch to GND on Feather
• Switch to EN on Feather

Powering

The Adafruit board can be powered via USB or JST using a 3.7v lipo battery. In this project, a 2200mAh lipo battery is used. The lipo battery is rechargeable via the USB port on the board. The switch is wired to the enable and ground pins on the board.